[PATCH v3 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding

[Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>]

Needed to enable this chip on a Renesas KingFisher board. Description
copied over from the Mediatek driver which already supports it.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 4835a280b3bf..8e97e475613f 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -41,6 +41,9 @@ properties:
     description: >
       Backup voltage regulator
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - vcc-supply
@@ -49,10 +52,12 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     serial {
         gnss {
             compatible = "u-blox,neo-8";
             v-bckp-supply = <&gnss_v_bckp_reg>;
             vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
         };
     };
-- 
2.35.1