Describe the two General Purpose LEDs LED7 and LED8 on the Spider CPU
board, so they can be used as indicator LEDs.
Note that General Purpose LEDs LED9 to LED11 are not added, as they are
connected to GPIO block 4, which can only be accessed from the Control
Domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
I do not have physical access to a Spider development board.
Thanks for testing!
---
.../boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index dd8e0e1595260b3d..76a94812875ef261 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -6,6 +6,8 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
#include "r8a779f0.dtsi"
/ {
@@ -22,6 +24,24 @@ chosen {
stdout-path = "serial0:1843200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-7 {
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <7>;
+ };
+
+ led-8 {
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <8>;
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
--
2.34.1
