[PATCH v2 2/2] clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v1->v2:
 * Added Rb tags from Geert and Marek.
 * Removed error check as all tables have data pointers.
 * Retained Rb tag as the change is trivial.
---
 drivers/clk/clk-versaclock7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-versaclock7.c b/drivers/clk/clk-versaclock7.c
index 7f4361084882..9ab35c1af0ff 100644
--- a/drivers/clk/clk-versaclock7.c
+++ b/drivers/clk/clk-versaclock7.c
@@ -1108,7 +1108,7 @@ static int vc7_probe(struct i2c_client *client)
 
 	i2c_set_clientdata(client, vc7);
 	vc7->client = client;
-	vc7->chip_info = device_get_match_data(&client->dev);
+	vc7->chip_info = i2c_get_match_data(client);
 
 	vc7->pin_xin = devm_clk_get(&client->dev, "xin");
 	if (PTR_ERR(vc7->pin_xin) == -EPROBE_DEFER) {
-- 
2.25.1