RE: [PATCH v17 17/20] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Serge,

> From: Serge Semin, Sent: Wednesday, July 12, 2023 8:35 PM
> 
> On Wed, Jul 05, 2023 at 08:42:03PM +0900, Yoshihiro Shimoda wrote:
> > Add R-Car Gen4 PCIe Host support. This controller is based on
> > Synopsys DesignWare PCIe, but this controller has vendor-specific
> > registers so that requires initialization code like mode setting
> > and retraining and so on.
> >
> > To reduce code delta, adds some helper functions which are used by
> > both the host driver and the endpoint driver (which is added
> > immediately afterwards) into a separate file.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/Kconfig            |   9 +
> >  drivers/pci/controller/dwc/Makefile           |   2 +
> >  .../pci/controller/dwc/pcie-rcar-gen4-host.c  | 144 +++++++++++++
> >  drivers/pci/controller/dwc/pcie-rcar-gen4.c   | 197 ++++++++++++++++++
> >  drivers/pci/controller/dwc/pcie-rcar-gen4.h   |  43 ++++
> >  5 files changed, 395 insertions(+)
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.h
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index ab96da43e0c2..64d4d37bc891 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -415,4 +415,13 @@ config PCIE_VISCONTI_HOST
> >  	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
> >  	  This driver supports TMPV7708 SoC.
> >
> > +config PCIE_RCAR_GEN4
> > +	tristate "Renesas R-Car Gen4 PCIe Host controller"
> > +	depends on ARCH_RENESAS || COMPILE_TEST
> > +	depends on PCI_MSI
> > +	select PCIE_DW_HOST
> > +	help
> > +	  Say Y here if you want PCIe host controller support on R-Car Gen4 SoCs.
> > +	  This uses the DesignWare core.
> > +
> >  endmenu
> > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > index bf5c311875a1..486cf706b53d 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -26,6 +26,8 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> >  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> >  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> >  obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> > +pcie-rcar-gen4-host-drv-objs := pcie-rcar-gen4.o pcie-rcar-gen4-host.o
> > +obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4-host-drv.o
> >
> >  # The following drivers are for devices that use the generic ACPI
> >  # pci_root.c driver but don't support standard ECAM config access.
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > new file mode 100644
> > index 000000000000..e7c1eef792ec
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > @@ -0,0 +1,144 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * PCIe host controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "pcie-rcar-gen4.h"
> > +#include "pcie-designware.h"
> > +
> > +static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +	int ret;
> > +	u32 val;
> > +
> > +	gpiod_set_value_cansleep(dw->pe_rst, 1);
> > +
> > +	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> > +	if (ret) {
> > +		dev_err(dw->dev, "Failed to enable ref clocks\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = rcar_gen4_pcie_basic_init(rcar);
> > +	if (ret < 0) {
> > +		clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> > +		return ret;
> > +	}
> > +
> > +	/*
> > +	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
> > +	 * Rev.5.20a, we should disable two BARs to avoid unnecessary memory
> > +	 * assignment during device enumeration.
> > +	 */
> > +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
> > +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);
> > +
> > +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > +		/* Enable MSI interrupt signal */
> > +		val = readl(rcar->base + PCIEINTSTS0EN);
> > +		val |= MSI_CTRL_INT;
> > +		writel(val, rcar->base + PCIEINTSTS0EN);
> > +	}
> > +
> > +	msleep(100);	/* pe_rst requires 100msec delay */
> > +
> > +	gpiod_set_value_cansleep(dw->pe_rst, 0);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_host_ops rcar_gen4_pcie_host_ops = {
> > +	.host_init = rcar_gen4_pcie_host_init,
> > +};
> > +
> > +static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar,
> 
> > +				   struct platform_device *pdev)
> 
> The argument is unused. What about dropping it?

You're correct. I'll drop it on v18.

> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +	struct dw_pcie_rp *pp = &dw->pp;
> > +
> > +	pp->num_vectors = MAX_MSI_IRQS;
> > +	pp->ops = &rcar_gen4_pcie_host_ops;
> > +
> > +	return dw_pcie_host_init(pp);
> > +}
> > +
> > +static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> > +{
> > +	dw_pcie_host_deinit(&rcar->dw.pp);
> > +	gpiod_set_value_cansleep(rcar->dw.pe_rst, 1);
> > +}
> > +
> > +static int rcar_gen4_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct rcar_gen4_pcie *rcar;
> > +	int err;
> > +
> > +	rcar = rcar_gen4_pcie_devm_alloc(dev);
> > +	if (!rcar)
> > +		return -ENOMEM;
> > +
> > +	err = rcar_gen4_pcie_get_resources(rcar, pdev);
> > +	if (err < 0) {
> > +		dev_err(dev, "Failed to request resource: %d\n", err);
> > +		return err;
> > +	}
> > +
> 
> > +	platform_set_drvdata(pdev, rcar);
> 
> This could have been moved to rcar_gen4_pcie_devm_alloc(). But see my
> last comment first.

I think so.

> > +
> > +	err = rcar_gen4_pcie_prepare(rcar);
> > +	if (err < 0)
> > +		return err;
> > +
> 
> > +	rcar->mode = DW_PCIE_RC_TYPE;
> 
> What about moving this to the rcar_gen4_add_dw_pcie_rp() method? Thus
> it will look similar to the rcar_gen4_add_pcie_ep() method you
> implemented in the Rcar Gen4 EP driver.

Yes. I'll move this to the rcar_gen4_add_dw_pcie_rp().

> > +	err = rcar_gen4_add_dw_pcie_rp(rcar, pdev);
> > +	if (err < 0)
> > +		goto err_add;
> > +
> > +	return 0;
> > +
> > +err_add:
> > +	rcar_gen4_pcie_unprepare(rcar);
> > +
> > +	return err;
> > +}
> > +
> 
> > +static int rcar_gen4_pcie_remove(struct platform_device *pdev)
> > +{
> > +	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
> > +
> > +	rcar_gen4_remove_dw_pcie_rp(rcar);
> > +	rcar_gen4_pcie_unprepare(rcar);
> > +
> > +	return 0;
> > +}
> 
> Please convert this function to returning void and assign to the
> platform_driver.remove_new pointer instead.

I got it.

> > +
> > +static const struct of_device_id rcar_gen4_pcie_of_match[] = {
> > +	{ .compatible = "renesas,rcar-gen4-pcie", },
> > +	{},
> > +};
> > +
> > +static struct platform_driver rcar_gen4_pcie_driver = {
> > +	.driver = {
> > +		.name = "pcie-rcar-gen4",
> > +		.of_match_table = rcar_gen4_pcie_of_match,
> > +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> > +	},
> > +	.probe = rcar_gen4_pcie_probe,
> 
> > +	.remove = rcar_gen4_pcie_remove,
> 
> ditto

I'll fix this.

> > +};
> > +module_platform_driver(rcar_gen4_pcie_driver);
> > +
> > +MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe host controller driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > new file mode 100644
> > index 000000000000..2cd5c17c1695
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > @@ -0,0 +1,197 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pci.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +
> > +#include "pcie-rcar-gen4.h"
> > +#include "pcie-designware.h"
> > +
> > +/* Renesas-specific */
> > +#define PCIERSTCTRL1		0x0014
> > +#define  APP_HOLD_PHY_RST	BIT(16)
> > +#define  APP_LTSSM_ENABLE	BIT(0)
> > +
> > +#define RCAR_NUM_SPEED_CHANGE_RETRIES	10
> > +#define RCAR_MAX_LINK_SPEED		4
> > +
> > +static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
> > +					bool enable)
> > +{
> > +	u32 val;
> > +
> > +	val = readl(rcar->base + PCIERSTCTRL1);
> > +	if (enable) {
> > +		val |= APP_LTSSM_ENABLE;
> > +		val &= ~APP_HOLD_PHY_RST;
> > +	} else {
> > +		/*
> > +		 * Since the datasheet of R-Car doesn't mention how to assert
> > +		 * the APP_HOLD_PHY_RST, don't assert it again. Otherwise,
> > +		 * hang-up issue happened in the dw_edma_core_off() when
> > +		 * the controller didn't detect a PCI device.
> > +		 */
> > +		val &= ~APP_LTSSM_ENABLE;
> > +	}
> > +	writel(val, rcar->base + PCIERSTCTRL1);
> > +}
> > +
> > +static int rcar_gen4_pcie_link_up(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +	u32 val, mask;
> > +
> > +	val = readl(rcar->base + PCIEINTSTS0);
> > +	mask = RDLH_LINK_UP | SMLH_LINK_UP;
> > +
> > +	return (val & mask) == mask;
> > +}
> > +
> > +static bool rcar_gen4_pcie_speed_change(struct dw_pcie *dw)
> > +{
> > +	u32 val;
> > +	int i;
> > +
> > +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > +	val &= ~PORT_LOGIC_SPEED_CHANGE;
> > +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > +
> > +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > +	val |= PORT_LOGIC_SPEED_CHANGE;
> > +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > +
> > +	for (i = 0; i < RCAR_NUM_SPEED_CHANGE_RETRIES; i++) {
> > +		val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > +		if (!(val & PORT_LOGIC_SPEED_CHANGE))
> > +			return true;
> > +		usleep_range(10000, 11000);
> > +	}
> > +
> > +	return false;
> > +}
> > +
> > +static int rcar_gen4_pcie_start_link(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +	int i, changes;
> > +
> > +	rcar_gen4_pcie_ltssm_enable(rcar, true);
> > +
> > +	/*
> > +	 * Require direct speed change with retrying here if the link_gen is
> 
> > +	 * PCIe Gen2 or later.
> 
> s/later/higher

I'll fix this.

> > +	 */
> > +	changes = min_not_zero(dw->link_gen, RCAR_MAX_LINK_SPEED) - 1;
> > +
> > +	/*
> > +	 * Since dw_pcie_setup_rc() sets it once, PCIe Gen2 will be trained.
> 
> > +	 * So, this needs remaining times for PCIe Gen4 if RC mode.
> 
> For "_up to_ PCIe Gen4", isn't it? Because AFAIR PCIe Gen3 will need
> to have one changes-iteration for RC mode.

You're correct. I'll fix it.

> > +	 */
> > +	if (changes && rcar->mode == DW_PCIE_RC_TYPE)
> > +		changes--;
> > +
> > +	for (i = 0; i < changes; i++) {
> > +		if (!rcar_gen4_pcie_speed_change(dw))
> > +			break;	/* No error because possible disconnected here if EP mode */
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void rcar_gen4_pcie_stop_link(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +
> > +	rcar_gen4_pcie_ltssm_enable(rcar, false);
> > +}
> > +
> > +int rcar_gen4_pcie_basic_init(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +	u32 val;
> > +
> > +	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
> > +		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> > +
> > +	val = readl(rcar->base + PCIEMSR0);
> > +	if (rcar->mode == DW_PCIE_RC_TYPE)
> > +		val |= DEVICE_TYPE_RC;
> > +	else if (rcar->mode == DW_PCIE_EP_TYPE)
> > +		val |= DEVICE_TYPE_EP;
> > +	else
> > +		return -EINVAL;
> > +
> > +	if (dw->num_lanes < 4)
> > +		val |= BIFUR_MOD_SET_ON;
> > +
> > +	writel(val, rcar->base + PCIEMSR0);
> > +
> > +	return reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> > +}
> > +
> > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct device *dev = rcar->dw.dev;
> > +	int err;
> > +
> > +	pm_runtime_enable(dev);
> > +	err = pm_runtime_resume_and_get(dev);
> > +	if (err < 0) {
> > +		dev_err(dev, "Failed to resume/get Runtime PM\n");
> > +		pm_runtime_disable(dev);
> > +	}
> > +
> 
> > +	dw_pcie_cap_set(&rcar->dw, REQ_RES);
> 
> Hmm, why is this here? Isn't it more appropriate to have it in
> rcar_gen4_pcie_devm_alloc() together with the EDMA_UNROLL flag
> setting? REQ_RES flag indicates a request for the driver core to get
> the generic DW PCIe RP/EP resources. It doesn't look as being
> suitable to be set in a prepare()-like method.

I don't have a special reason.. So, I'll move this to
the rcar_gen4_pcie_devm_alloc().

> > +
> > +	return err;
> > +}
> > +
> > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct device *dev = rcar->dw.dev;
> > +	struct dw_pcie *dw = &rcar->dw;
> > +
> 
> > +	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
> > +		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> 
> The de-assertion is performed in rcar_gen4_pcie_basic_init() which is
> called from the host_init() method. The respective antagonist is
> supposed to be performed in the host_deinit() in order to revert the
> changes on any error spotted in the host_init() and have a fully
> cleaned up device on the remove() procedure. Having something like
> rcar_gen4_pcie_basic_deinit() for it seems suitable.
> 
> BTW I would have added dw->pe_rst assertion to
> dw_pcie_host_ops.host_deinit() too.

I understood it. I'll fix it.

> > +	pm_runtime_put(dev);
> > +	pm_runtime_disable(dev);
> > +}
> > +
> > +int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar,
> > +				 struct platform_device *pdev)
> > +{
> > +	/* Renesas-specific registers */
> > +	rcar->base = devm_platform_ioremap_resource_byname(pdev, "app");
> > +	if (IS_ERR(rcar->base))
> > +		return PTR_ERR(rcar->base);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_ops dw_pcie_ops = {
> > +	.start_link = rcar_gen4_pcie_start_link,
> > +	.stop_link = rcar_gen4_pcie_stop_link,
> > +	.link_up = rcar_gen4_pcie_link_up,
> > +};
> > +
> > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct device *dev)
> > +{
> > +	struct rcar_gen4_pcie *rcar;
> > +
> > +	rcar = devm_kzalloc(dev, sizeof(*rcar), GFP_KERNEL);
> > +	if (!rcar)
> > +		return NULL;
> > +
> > +	rcar->dw.dev = dev;
> > +	rcar->dw.ops = &dw_pcie_ops;
> > +	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
> > +
> > +	return rcar;
> > +}
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.h b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > new file mode 100644
> > index 000000000000..e9cb816b33fa
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > @@ -0,0 +1,43 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#ifndef _PCIE_RCAR_GEN4_H_
> > +#define _PCIE_RCAR_GEN4_H_
> > +
> > +#include <linux/io.h>
> > +#include <linux/pci.h>
> > +
> > +#include "pcie-designware.h"
> > +
> > +/* Renesas-specific */
> > +#define PCIEMSR0		0x0000
> > +#define  BIFUR_MOD_SET_ON	BIT(0)
> > +#define  DEVICE_TYPE_EP		0
> > +#define  DEVICE_TYPE_RC		BIT(4)
> > +
> > +#define PCIEINTSTS0		0x0084
> > +#define PCIEINTSTS0EN		0x0310
> > +#define  MSI_CTRL_INT		BIT(26)
> > +#define  SMLH_LINK_UP		BIT(7)
> > +#define  RDLH_LINK_UP		BIT(6)
> > +#define PCIEDMAINTSTSEN		0x0314
> > +#define  PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
> > +
> > +struct rcar_gen4_pcie {
> > +	enum dw_pcie_device_mode mode;
> 
> > +	struct dw_pcie dw;
> 
> By moving this field to the head of the structure you'll have a
> zero offset dw field with respect to the base-address of the
> container. This will convert the container_of() macro to the just
> type-cast.

I'll move it.

> > +	void __iomem *base;
> > +};
> 
> > +#define to_rcar_gen4_pcie(x)	dev_get_drvdata((x)->dev)
> 
> Why? You have dw_pcie instance embedded into the rcar_gen4_pcie
> structure. What about using the container_of() pattern then?
> +#define to_rcar_gen4_pcie(_dw) container_of(_dw, struct rcar_gen4_pcie, dw)

This is because almost other drivers in drivers/pci/controller/dwc/ use dev_get_drvdata().
I believe either way is fine.

> > +
> > +int rcar_gen4_pcie_basic_init(struct rcar_gen4_pcie *rcar);
> 
> > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *pcie);
> > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *pcie);
> 
> s/pcie/rcar

I'll fix it.

> > +int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar,
> 
> > +				 struct platform_device *pdev);
> > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct device *dev);
> 
> Just a general note you may find useful. If I were you I would have
> added struct platform_device *pdev field to struct rcar_gen4_pcie and
> initialized it in the rcar_gen4_pcie_devm_alloc() method (it shall
> accept the platform_device pointer argument instead of just device).
> Thus you'll always have the {platform_}device pointer around as soon
> as you have the rcar_gen4_pcie pointer available which much more
> common case in the most of LLDD. This will greatly simplify any
> possible driver updates in future. Moreover you won't need to pass an
> additional device-pointer to the methods defined in your driver. For
> instance, in that case the rcar_gen4_pcie_get_resources() will need to
> accept just rcar_gen4_pcie pointer. Thus it will look unified aside
> with the rest of the methods in your driver.

Thank you for your suggestion. I think so. So, I'll fix it.

Best regards,
Yoshihiro Shimoda

> -Serge(y)
> 
> > +
> > +#endif /* _PCIE_RCAR_GEN4_H_ */
> > --
> > 2.25.1
> >




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux