As per RZ/G2L HW(Rev.1.30 May2023) manual, there is no "write enable"
bits for CPG_SIPLL5_CLK1 register. So fix the CPG_SIPLL5_CLK register
write by removing "write enable" bits.
Fixes: 1561380ee72f ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support")
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
drivers/clk/renesas/rzg2l-cpg.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 93b02cdc98c2..ca8b921c7762 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -603,10 +603,8 @@ static int rzg2l_cpg_sipll5_set_rate(struct clk_hw *hw,
}
/* Output clock setting 1 */
- writel(CPG_SIPLL5_CLK1_POSTDIV1_WEN | CPG_SIPLL5_CLK1_POSTDIV2_WEN |
- CPG_SIPLL5_CLK1_REFDIV_WEN | (params.pl5_postdiv1 << 0) |
- (params.pl5_postdiv2 << 4) | (params.pl5_refdiv << 8),
- priv->base + CPG_SIPLL5_CLK1);
+ writel((params.pl5_postdiv1 << 0) | (params.pl5_postdiv2 << 4) |
+ (params.pl5_refdiv << 8), priv->base + CPG_SIPLL5_CLK1);
/* Output clock setting, SSCG modulation value setting 3 */
writel((params.pl5_fracin << 8), priv->base + CPG_SIPLL5_CLK3);
--
2.25.1
