SH_ETH doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 6a1dbfefdae4 ("net: sh_eth: Fix PHY state warning splat during system resume")
Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/renesas/sh_eth.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index ed17163d7811..d8ec729825be 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2029,8 +2029,6 @@ static int sh_eth_phy_init(struct net_device *ndev)
if (mdp->cd->register_type != SH_ETH_REG_GIGABIT)
phy_set_max_speed(phydev, SPEED_100);
- /* Indicate that the MAC is responsible for managing PHY PM */
- phydev->mac_managed_pm = true;
phy_attached_info(phydev);
return 0;
@@ -3097,6 +3095,8 @@ static int sh_mdio_init(struct sh_eth_private *mdp,
struct bb_info *bitbang;
struct platform_device *pdev = mdp->pdev;
struct device *dev = &mdp->pdev->dev;
+ struct phy_device *phydev;
+ struct device_node *pn;
/* create bit control struct for PHY */
bitbang = devm_kzalloc(dev, sizeof(struct bb_info), GFP_KERNEL);
@@ -3133,6 +3133,14 @@ static int sh_mdio_init(struct sh_eth_private *mdp,
if (ret)
goto out_free_bus;
+ pn = of_parse_phandle(dev->of_node, "phy-handle", 0);
+ phydev = of_phy_find_device(pn);
+ if (phydev) {
+ phydev->mac_managed_pm = true;
+ put_device(&phydev->mdio.dev);
+ }
+ of_node_put(pn);
+
return 0;
out_free_bus:
--
2.30.2
