When suspending/resuming an interface which was not up, we saw mdiobus related PM handling despite 'mac_managed_pm' being set for RAVB/SH_ETH. Heiner kindly suggested the fix to set this flag at probe time, not at init/open time. I implemented his suggestion and it works fine on these two Renesas drivers. These are patches 1+2. I then looked which other drivers could be affected by the same problem. I could only identify two where I am quite sure. Because I don't have any HW, I opted to at least add a FIXME and send this out as patches 3+4. Ideally, they will never need to go upstream because the relevant people will see their patch and do something like I did for patches 1+2. Looking forward to comments. Thanks and happy hacking! Wolfram Sang (4): ravb: avoid PHY being resumed when interface is not up sh_eth: avoid PHY being resumed when interface is not up fec: add FIXME to move 'mac_managed_pm' to probe smsc911x: add FIXME to move 'mac_managed_pm' to probe drivers/net/ethernet/freescale/fec_main.c | 1 + drivers/net/ethernet/renesas/ravb_main.c | 12 ++++++++++-- drivers/net/ethernet/renesas/sh_eth.c | 12 ++++++++++-- drivers/net/ethernet/smsc/smsc911x.c | 1 + 4 files changed, 22 insertions(+), 4 deletions(-) -- 2.30.2