The UART IP found on {RZ/V2M, EMMA mobile} SoC is Register-compatible
with the general-purpose 16750 UART chip. This patch updates port type
from 16550A->16750 and also enables 64-bytes fifo support.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v3->v4:
* Both {RZ/V2M, EMMA mobile} SoC is Register-compatible
with the general-purpose 16750 UART chip. So started using
generic compatible and removed struct serial8250_em_hw_info.
* Removed Rb tag from Ilpo as it is new change.
v2->v3:
* Replaced of_device_get_match_data()->device_get_match_data().
* Replaced of_device.h->property.h
* Dropped struct serial8250_em_hw_info *info from priv and started
using a local variable info in probe().
* Retained Rb tag from Ilpo as changes are trivial.
v2:
* New patch
---
drivers/tty/serial/8250/8250_em.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 9781bf73ed0c..499d7a8847ec 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -102,8 +102,8 @@ static int serial8250_em_probe(struct platform_device *pdev)
memset(&up, 0, sizeof(up));
up.port.mapbase = regs->start;
up.port.irq = irq;
- up.port.type = PORT_UNKNOWN;
- up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+ up.port.type = PORT_16750;
+ up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE;
up.port.dev = dev;
up.port.private_data = priv;
--
2.25.1
