So, I would like to change the MACTYPE as SGMII by software for the platform. The patch [1/4] sets phydev->host_interfaces by phylink for Marvell PHY driver (marvell10g) to initialize the MACTYPE. The patch [2/4] siplifies the rswitch driver, the patch [3/4] enables the ovr_host_interfaces flag, and the patch [4/4] phy_power_on() calling to initialize the Ethernet SERDES PHY driver (r8a779f0-eth-serdes) for each channel. Changes from v3: https://lore.kernel.org/all/20230127014812.1656340-1-yoshihiro.shimoda.uh@xxxxxxxxxxx/ - Keep a pointer of "port" and more simplify the code. Changes from v2: - Add some blank lines for readability. Changes from v1: - Add a new flag (ovr_host_interfaces) into phylink_config in the patch [1/4]. - Add a new patch [3/4] for the new flag. - Add a error message to the patch [4/4/] for MLO_AN_INBAND mode. Yoshihiro Shimoda (4): net: phylink: Set host_interfaces for a non-sfp PHY net: ethernet: renesas: rswitch: Simplify struct phy * handling net: ethernet: renesas: rswitch: Enable ovr_host_interfaces net: ethernet: renesas: rswitch: Add phy_power_{on,off}() calling drivers/net/ethernet/renesas/rswitch.c | 116 ++++++++----------------- drivers/net/ethernet/renesas/rswitch.h | 2 + drivers/net/phy/phylink.c | 11 +++ include/linux/phylink.h | 3 + 4 files changed, 54 insertions(+), 78 deletions(-) -- 2.25.1
