[PATCH net-next v4 1/4] net: phylink: Set host_interfaces for a non-sfp PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If a new flag (ovr_host_interfaces) in the phylink_config is set,
overwrite the host_interfaces in the phy_device by link_interface.

Note that an ethernet PHY driver like marvell10g will check
PHY_INTERFACE_MODE_SGMII in the host_interfaces whther the host
controller supports a rate matching interface mode or not. So, set
PHY_INTERFACE_MODE_SGMII to the host_interfaces if it is set in
the supported_interfaces.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/net/phy/phylink.c | 11 +++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 319790221d7f..dee64b4a1175 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1814,6 +1814,17 @@ int phylink_fwnode_phy_connect(struct phylink *pl,
 		pl->link_config.interface = pl->link_interface;
 	}
 
+	if (pl->config->ovr_host_interfaces) {
+		__set_bit(pl->link_interface, phy_dev->host_interfaces);
+
+		/* An ethernet PHY driver will check PHY_INTERFACE_MODE_SGMII
+		 * in the host_interfaces whether the host controller supports
+		 * a rate matching interface mode or not.
+		 */
+		if (test_bit(PHY_INTERFACE_MODE_SGMII, pl->config->supported_interfaces))
+			__set_bit(PHY_INTERFACE_MODE_SGMII, phy_dev->host_interfaces);
+	}
+
 	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
 				pl->link_interface);
 	if (ret) {
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index c492c26202b5..c8dd53b1e857 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -124,6 +124,8 @@ enum phylink_op_type {
  *		      if MAC link is at %MLO_AN_FIXED mode.
  * @mac_managed_pm: if true, indicate the MAC driver is responsible for PHY PM.
  * @ovr_an_inband: if true, override PCS to MLO_AN_INBAND
+ * @ovr_host_interfaces: if true, override host_interfaces of phy_device from
+ *			 link_interface.
  * @get_fixed_state: callback to execute to determine the fixed link state,
  *		     if MAC link is at %MLO_AN_FIXED mode.
  * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx
@@ -137,6 +139,7 @@ struct phylink_config {
 	bool poll_fixed_state;
 	bool mac_managed_pm;
 	bool ovr_an_inband;
+	bool ovr_host_interfaces;
 	void (*get_fixed_state)(struct phylink_config *config,
 				struct phylink_link_state *state);
 	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux