Add the missing trigger patterns for Bluetooth and WLAN activity, which
are already in active use.
While at it, move the mmc pattern comment where it belongs, and restore
alphabetical sort order.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'hci0-power' does not match '^mmc[0-9]+$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
'phy0tx' does not match '^mmc[0-9]+$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
v2:
- Add Reviewed-by.
---
Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5c57a580078ea23..d34bb58c00371402 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -98,9 +98,13 @@ properties:
# LED alters the brightness for the specified duration with one software
# timer (requires "led-pattern" property)
- pattern
- # LED is triggered by SD/MMC activity
- - pattern: "^mmc[0-9]+$"
- pattern: "^cpu[0-9]*$"
+ - pattern: "^hci[0-9]+-power$"
+ # LED is triggered by Bluetooth activity
+ - pattern: "^mmc[0-9]+$"
+ # LED is triggered by SD/MMC activity
+ - pattern: "^phy[0-9]+tx$"
+ # LED is triggered by WLAN activity
led-pattern:
description: |
--
2.34.1
