This patch series aims to add USB3.1 HOST, Peri and DRD support
on RZ/V2M EVK platform.
The reset for both host and peri are located in USB3DRD block. The
USB3DRD registers are mapped in the AXI address space of the Peripheral
module.
RZ/V2M XHCI is similar to R-Car XHCI but it doesn't require any
firmware.
Host/device needs to do reset release and set the host/device function
on DRD module, before accessing any registers.
v2->v3:
* Fixed the X86 compilation for allmodconfig.
* Added Rb and Acked-by tag from Rob for all the binding patches.
* Changed USB_RZV2M_USB3DRD config option type from bool->tristate
* Updated default values for the USB_RZV2M_USB3DRD config option
* Updated USB_XHCI_PLATFORM to select USB_XHCI_RZV2M if ARCH_R9A09G011
enabled.
v1->v2:
* Added Rb tag from Rob for host binding patch
* Renamed clock-name from "host_axi"->"axi"
* Drop quotes around usb-xhci.yaml.
* Moved DRD interrupts from device ctrlr to DRD bindings
* Updated interrupts and dropped interrupt-names in device ctrlr bindings
* Renamed aclk->axi in device ctrlr bindings
* Added DRD interrupts and interrupt-names in DRD bindings
* Dropped peripheral reset and reset-names from DRD bindings
* Added reg property for usb3 device ctrlr nodes
* Renamed peri_axi->axi and apb->reg
* Updated pattern properties and example.
* Moved header file from include/linux/soc/renesas->include/linux/usb
* Passing DRD irq resource from parent to usb3_peri for handling it.
* As drd reg is now separated from usb3 peri, updated DRD reg handling in
usb3 peri driver.
* Removed usb3 peri reset handling from DRD driver.
* Added Rb tag from Geert for reset and clock updates for xhci-plat.
Biju Das (12):
dt-bindings: usb: renesas,usb-xhci: Document RZ/V2M support
dt-bindings: usb: renesas,usb3-peri: Update reset, clock-name and
interrupts properties
dt-bindings: usb: renesas,usb3-peri: Document RZ/V2MA bindings
dt-bindings: usb: Add RZ/V2M USB3DRD binding
usb: gadget: Add support for RZ/V2M USB3DRD driver
usb: gadget: udc: renesas_usb3: Add role switch support for RZ/V2M
usb: host: xhci-plat: Improve clock handling in probe()
usb: host: xhci-plat: Add reset support
xhci: host: Add Renesas RZ/V2M SoC support
arm64: dts: renesas: r9a09g011: Add USB3 DRD, device and host nodes
arm64: dts: renesas: rzv2mevk2: Enable USB3 DRD, Peripheral and Host
arm64: dts: renesas: rzv2mevk2: Enable USB3 role switch
.../bindings/usb/renesas,rzv2m-usb3drd.yaml | 129 ++++++++++++++++
.../bindings/usb/renesas,usb-xhci.yaml | 41 +++++-
.../bindings/usb/renesas,usb3-peri.yaml | 40 +----
.../boot/dts/renesas/r9a09g011-v2mevk2.dts | 76 ++++++++++
arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 45 ++++++
drivers/usb/gadget/udc/Kconfig | 13 ++
drivers/usb/gadget/udc/Makefile | 1 +
drivers/usb/gadget/udc/renesas_usb3.c | 136 +++++++++++------
drivers/usb/gadget/udc/rzv2m_usb3drd.c | 139 ++++++++++++++++++
drivers/usb/host/Kconfig | 10 ++
drivers/usb/host/Makefile | 3 +
drivers/usb/host/xhci-plat.c | 36 ++++-
drivers/usb/host/xhci-rzv2m.c | 38 +++++
drivers/usb/host/xhci-rzv2m.h | 16 ++
include/linux/usb/rzv2m_usb3drd.h | 20 +++
15 files changed, 656 insertions(+), 87 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml
create mode 100644 drivers/usb/gadget/udc/rzv2m_usb3drd.c
create mode 100644 drivers/usb/host/xhci-rzv2m.c
create mode 100644 drivers/usb/host/xhci-rzv2m.h
create mode 100644 include/linux/usb/rzv2m_usb3drd.h
--
2.25.1
