Re: [PATCH] dt-bindings: leds: Document Bluetooth and WLAN triggers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/11/2022 15:46, Geert Uytterhoeven wrote:
> Add the missing trigger patterns for Bluetooth and WLAN activity, which
> are already in active use.
> 
> While at it, move the mmc pattern comment where it belongs, and restore
> alphabetical sort order.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
> 	'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> 	'hci0-power' does not match '^mmc[0-9]+$'
> 	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
> arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
> 	'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> 	'phy0tx' does not match '^mmc[0-9]+$'
> 	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

This patch got lost... Rob, Lee or Pavel, can you pick it up?

It's with Rob's approval:
https://lore.kernel.org/all/166861772609.231295.14812410099261417331.robh@xxxxxxxxxx/

> ---
>  Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index f5c57a580078ea23..d34bb58c00371402 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -98,9 +98,13 @@ properties:
>              # LED alters the brightness for the specified duration with one software
>              # timer (requires "led-pattern" property)
>            - pattern
> -        # LED is triggered by SD/MMC activity
> -      - pattern: "^mmc[0-9]+$"
>        - pattern: "^cpu[0-9]*$"
> +      - pattern: "^hci[0-9]+-power$"
> +        # LED is triggered by Bluetooth activity
> +      - pattern: "^mmc[0-9]+$"
> +        # LED is triggered by SD/MMC activity
> +      - pattern: "^phy[0-9]+tx$"
> +        # LED is triggered by WLAN activity
>  
>    led-pattern:
>      description: |

Best regards,
Krzysztof




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux