Re: [PATCH v5] mmc: renesas_sdhi: Fix rounding errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 30, 2022 at 11:09:07AM +0200, Geert Uytterhoeven wrote:
> On Wed, Sep 28, 2022 at 1:08 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > Due to clk rounding errors on RZ/G2L platforms, it selects a clock source
> > with a lower clock rate compared to a higher one.
> > For eg: The rounding error (533333333 Hz / 4 * 4 = 533333332 Hz < 5333333
> > 33 Hz) selects a clk source of 400 MHz instead of 533.333333 MHz.
> >
> > This patch fixes this issue by adding a margin of (1/1024) higher to
> > the clock rate.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v4->v5:
> >  * Moved upper limit calculation inside the for loop as it caused
> >    regression on R-Car M2-W board.
> >  * Removed Rb tag from Wolfram as there is some new changes.
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> 
> Still works fine on R-Car Gen2/Gen3, so:
> Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

I'll test this patch on Monday.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux