From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Implement the bridge connector-related .get_edid() and .detect()
operations, and report the related bridge capabilities and type.
These ops are only added for DP mode. They should also be used for eDP
mode, but the driver seems to be mostly used for eDP and, according to
the comments, they've had issues with eDP panels and HPD. So better be
safe and only enable them for DP for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
Changes since v1:
- The connector .get_modes() operation doesn't rely on EDID anymore,
__ti_sn_bridge_get_edid() and ti_sn_bridge_get_edid() got merged
together
- Fix on top of Sam Ravnborg's DRM_BRIDGE_STATE_OPS
Changes since v2: [Kieran]
- Only support EDID on DRM_MODE_CONNECTOR_DisplayPort modes.
Changes since v3: [Kieran]
- Remove PM calls in ti_sn_bridge_get_edid() and simplify
Changes since v4:
- Add .detect()
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index a6b15ea4e84d..dd20624adc70 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -29,6 +29,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_bridge_connector.h>
+#include <drm/drm_edid.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
@@ -68,6 +69,7 @@
#define BPP_18_RGB BIT(0)
#define SN_HPD_DISABLE_REG 0x5C
#define HPD_DISABLE BIT(0)
+#define HPD_DEBOUNCED_STATE BIT(4)
#define SN_GPIO_IO_REG 0x5E
#define SN_GPIO_INPUT_SHIFT 4
#define SN_GPIO_OUTPUT_SHIFT 0
@@ -1163,10 +1165,33 @@ static void ti_sn_bridge_atomic_post_disable(struct drm_bridge *bridge,
pm_runtime_put_sync(pdata->dev);
}
+static enum drm_connector_status ti_sn_bridge_detect(struct drm_bridge *bridge)
+{
+ struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+ int val = 0;
+
+ pm_runtime_get_sync(pdata->dev);
+ regmap_read(pdata->regmap, SN_HPD_DISABLE_REG, &val);
+ pm_runtime_put_autosuspend(pdata->dev);
+
+ return val & HPD_DEBOUNCED_STATE ? connector_status_connected
+ : connector_status_disconnected;
+}
+
+static struct edid *ti_sn_bridge_get_edid(struct drm_bridge *bridge,
+ struct drm_connector *connector)
+{
+ struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+
+ return drm_get_edid(connector, &pdata->aux.ddc);
+}
+
static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
.attach = ti_sn_bridge_attach,
.detach = ti_sn_bridge_detach,
.mode_valid = ti_sn_bridge_mode_valid,
+ .get_edid = ti_sn_bridge_get_edid,
+ .detect = ti_sn_bridge_detect,
.atomic_pre_enable = ti_sn_bridge_atomic_pre_enable,
.atomic_enable = ti_sn_bridge_atomic_enable,
.atomic_disable = ti_sn_bridge_atomic_disable,
@@ -1262,6 +1287,9 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
+ if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+ pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
+
drm_bridge_add(&pdata->bridge);
ret = ti_sn_attach_host(pdata);
--
2.34.1
