Hi, This is possibly v5 of the series. I couldn't find v4, but the change logs suggested changes to v3, so I presumed there's v4. However, it might be v4 was never sent. In any case, this series introduces basic DP support for sn65dsi86. So far the driver has only supported eDP. With basic I mean that there's no support for real HPD, although we do implement detect callback. Link training is only done at atomic-enable-time, which is not really correct for DP. However, this series does give us a working display on a DP monitor. Due to physical restrictions I'm not able to actually test plug/unplug, changing monitors, and things like that, so the only "officially" supported scenario is a DP monitor that's always plugged in, although I think changing monitors should work. Tomi Laurent Pinchart (2): drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode drm/bridge: ti-sn65dsi86: Implement bridge connector operations Tomi Valkeinen (2): drm/bridge: ti-sn65dsi86: check AUX errors better drm/bridge: ti-sn65dsi86: Reject modes with too large blanking drivers/gpu/drm/bridge/ti-sn65dsi86.c | 77 +++++++++++++++++++++++++-- 1 file changed, 74 insertions(+), 3 deletions(-) -- 2.34.1
