[PATCH v2 1/2] dt-bindings: interrupt-controller: sifive,plic: Document Renesas RZ/Five SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document Renesas RZ/Five (R9A07G043) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2:
* Fixed binding doc
* Fixed review comments pointed by Krzysztof.

RFC->v1:
* Fixed Review comments pointed by Geert and Rob
---
 .../sifive,plic-1.0.0.yaml                    | 44 +++++++++++++++++--
 1 file changed, 41 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 27092c6a86c4..59df367d1e44 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -28,7 +28,10 @@ description:
 
   While the PLIC supports both edge-triggered and level-triggered interrupts,
   interrupt handlers are oblivious to this distinction and therefore it is not
-  specified in the PLIC device-tree binding.
+  specified in the PLIC device-tree binding for SiFive PLIC (and similar PLIC's),
+  but for the Renesas RZ/Five Soc (AX45MP AndesCore) which has NCEPLIC100 we need
+  to specify the interrupt type as the flow for EDGE interrupts is different
+  compared to LEVEL interrupts.
 
   While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
   "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
@@ -57,6 +60,7 @@ properties:
           - enum:
               - allwinner,sun20i-d1-plic
           - const: thead,c900-plic
+      - const: renesas,r9a07g043-plic
 
   reg:
     maxItems: 1
@@ -64,8 +68,7 @@ properties:
   '#address-cells':
     const: 0
 
-  '#interrupt-cells':
-    const: 1
+  '#interrupt-cells': true
 
   interrupt-controller: true
 
@@ -82,6 +85,12 @@ properties:
     description:
       Specifies how many external interrupts are supported by this controller.
 
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
 required:
   - compatible
   - '#address-cells'
@@ -91,6 +100,35 @@ required:
   - interrupts-extended
   - riscv,ndev
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        '#interrupt-cells':
+          const: 2
+
+      required:
+        - clocks
+        - resets
+        - power-domains
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
 additionalProperties: false
 
 examples:
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux