On Tue, 17 May 2022 11:35:26 +0800
Jialin Zhang <zhangjialin11@xxxxxxxxxx> wrote:
> fwnode_handle_put() should be used when terminating
> device_for_each_child_node() iteration with break or
> return to prevent stale device node references from
> being left behind.
>
> Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter")
> Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
> Signed-off-by: Jialin Zhang <zhangjialin11@xxxxxxxxxx>
Applied to the fixes-togreg branch of iio.git.
Thanks,
Jonathan
> ---
> drivers/iio/adc/rzg2l_adc.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
> index 7585144b9715..5b09a93fdf34 100644
> --- a/drivers/iio/adc/rzg2l_adc.c
> +++ b/drivers/iio/adc/rzg2l_adc.c
> @@ -334,11 +334,15 @@ static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l
> i = 0;
> device_for_each_child_node(&pdev->dev, fwnode) {
> ret = fwnode_property_read_u32(fwnode, "reg", &channel);
> - if (ret)
> + if (ret) {
> + fwnode_handle_put(fwnode);
> return ret;
> + }
>
> - if (channel >= RZG2L_ADC_MAX_CHANNELS)
> + if (channel >= RZG2L_ADC_MAX_CHANNELS) {
> + fwnode_handle_put(fwnode);
> return -EINVAL;
> + }
>
> chan_array[i].type = IIO_VOLTAGE;
> chan_array[i].indexed = 1;
