fwnode_handle_put() should be used when terminating
device_for_each_child_node() iteration with break or
return to prevent stale device node references from
being left behind.
Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter")
Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: Jialin Zhang <zhangjialin11@xxxxxxxxxx>
---
drivers/iio/adc/rzg2l_adc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 7585144b9715..5b09a93fdf34 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -334,11 +334,15 @@ static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l
i = 0;
device_for_each_child_node(&pdev->dev, fwnode) {
ret = fwnode_property_read_u32(fwnode, "reg", &channel);
- if (ret)
+ if (ret) {
+ fwnode_handle_put(fwnode);
return ret;
+ }
- if (channel >= RZG2L_ADC_MAX_CHANNELS)
+ if (channel >= RZG2L_ADC_MAX_CHANNELS) {
+ fwnode_handle_put(fwnode);
return -EINVAL;
+ }
chan_array[i].type = IIO_VOLTAGE;
chan_array[i].indexed = 1;
--
2.25.1
