Re: [PATCH v2 4/5] gpio: gpiolib: Add ngirq member to struct gpio_irq_chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 9, 2022 at 7:10 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:

> Supported GPIO IRQs by the chip is not always equal to the number of GPIO
> pins. For example on Renesas RZ/G2L SoC where it has GPIO0-122 pins but at
> a give point a maximum of only 32 GPIO pins can be used as IRQ lines in
> the IRQC domain.
>
> This patch adds ngirq member to struct gpio_irq_chip and passes this as a
> size to irq_domain_create_hierarchy()/irq_domain_create_simple() if it is
> being set in the driver otherwise fallbacks to using ngpio.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

As mentioned in some other patch, try to use .valid_mask for this instead.

Yours,
Linus Walleij



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux