Hi All, Gentle ping. Are we happy with this patch series? Please let me know. Cheers, Biju > Subject: [PATCH v2 0/2] Add RZ/G2L DSI driver > > This patch series aims to support the MIPI DSI encoder found in the RZ/G2L > SoC. It currently supports DSI mode only. > > This unit supports MIPI Alliance Specification for Display Serial > Interface (DSI) Specification. This unit provides a solution for > transmitting MIPI DSI compliant digital video and packets. Normative > References are below. > * MIPI Alliance Specification for Display Serial Interface Version 1.3.1 > * MIPI Alliance Specification for D-PHY Version 2.1 > > The following are key features of this unit. > > * 1 channel > * The number of Lane: 4-lane > * Support up to Full HD (1920 × 1080), 60 fps (RGB888) > * Maximum Bandwidth: 1.5 Gbps per lane > * Support Output Data Format: RGB666 / RGB888 > > v1->v2: > * Added full path for dsi-controller.yaml > * Modeled DSI + D-PHY as single block and updated reg property > * Fixed typo D_PHY->D-PHY > * Updated description > * Added interrupts and interrupt-names and updated the example > * Driver rework based on dt-binding changes (DSI + D-PHY) as single block > * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi > * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write > and rzg2l_mipi_dsi_link_write > * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read > RFC->v1: > * Added a ref to dsi-controller.yaml. > * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG > and dropped DRM as it is implied by DRM_BRIDGE > * Used devm_reset_control_get_exclusive() for reset handle > * Removed bool hsclkmode from struct rzg2l_mipi_dsi > * Added error check for pm, using pm_runtime_resume_and_get() instead of > pm_runtime_get_sync() > * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach() > * Avoided read-modify-write stopping hsclock > * Used devm_platform_ioremap_resource for resource allocation > * Removed unnecessary assert call from probe and remove. > * wrap the line after the PTR_ERR() in probe() > * Updated reset failure messages in probe > * Fixed the typo arstc->prstc > * Made hex constants to lower case. > RFC: > * > > Biju Das (2): > dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings > drm: rcar-du: Add RZ/G2L DSI driver > > .../bindings/display/bridge/renesas,dsi.yaml | 175 +++++ > drivers/gpu/drm/rcar-du/Kconfig | 8 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 686 ++++++++++++++++++ > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 149 ++++ > 5 files changed, 1019 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > > -- > 2.17.1
