Re: [PATCH v3] arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 1, 2022 at 4:57 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
> carrier board.  This patch adds pinmux and spi1 nodes to the carrier
> board dtsi file and drops deleting pinctl* properties from DTS file.
>
> RSPI1 interface is tested by setting the macro SW_RSPI_CAN to 0.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v2->v3:
>  * Removed redundant spi1 node, as it is already enabled in common.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v5.19.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux