RE: [PATCH 4/4] arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for the feedback.

> Subject: Re: [PATCH 4/4] arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1
> on carrier board
> 
> Hi Biju,
> 
> On Mon, Mar 7, 2022 at 8:24 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> wrote:
> > RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
> > carrier board.  This patch adds pinmux and spi1 nodes to the carrier
> > board dtsi file and drops deleting pinctl* properties from DTS file.
> >
> > RSPI1 interface is tested by setting the macro SW_RSPI_CAN to 0.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
> > --- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
> > @@ -13,9 +13,3 @@
> >         model = "Renesas SMARC EVK based on r9a07g044c2";
> >         compatible = "renesas,smarc-evk", "renesas,r9a07g044c2",
> > "renesas,r9a07g044";  };
> > -
> > -&spi1 {
> > -       /delete-property/ pinctrl-0;
> > -       /delete-property/ pinctrl-names;
> > -       status = "disabled";
> > -};
> 
> The common properties in rz-smarc-common.dtsi are indeed no longer
> removed...
> 
> > --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
> > @@ -74,6 +74,14 @@
> >         };
> >  };
> >
> > +#if (!SW_RSPI_CAN)
> > +&spi1 {
> 
> Spi1 should be inserted after scif1 below.

Agreed.

> 
> > +       pinctrl-0 = <&spi1_pins>;
> > +       pinctrl-names = "default";
> > +       status = "okay";
> > +};
> > +#endif
> 
> ... so regardless of the value of SW_RSPI_CAN, spi1 will be enabled?
> 
> I think you want to protect the disable block in r9a07g044c2-smarc.dts by

OK, will fix this in next version.


Cheers,
Biju

> #if SW_RSPI_CAN/#endif instead?
> 
>   + #if SW_RSPI_CAN
>     &spi1 {
>            /delete-property/ pinctrl-0;
>            /delete-property/ pinctrl-names;
>            status = "disabled";
>     };
>   + #endif
> 
> > +
> >  /*
> >   * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
> >   * SW1 should be at position 2->3 so that SER0_CTS# line is activated
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux