[PATCH V2 2/4] arm64: dts: renesas: rzg2l-smarc: Move out i2c3 and Audio codec from common dtsi

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

On RZ/G2L SoM module, the Audio codec is connected to i2c3 bus whereas on
RZ/G2LC, it is connected to i2c2 bus. So move out i2c3 and wm8978 nodes
from common dtsi to soc specific dtsi.

While at it add wm8978 node to RZ/G2LC SoC specific dtsi to fix the
build error.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2:
 * No change.
---
 arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts |  6 ------
 arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi  | 15 ---------------
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi      | 15 +++++++++++++++
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi     | 11 +++++++++++
 4 files changed, 26 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index d5254b16b0b3..dc39b05e9256 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -26,12 +26,6 @@
 	status = "disabled";
 };
 
-&i2c3 {
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	status = "disabled";
-};
-
 &spi1 {
 	/delete-property/ pinctrl-0;
 	/delete-property/ pinctrl-names;
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
index 588117aafaca..8dd1c69a6749 100644
--- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -26,7 +26,6 @@
 		serial0 = &scif0;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
-		i2c3 = &i2c3;
 	};
 
 	chosen {
@@ -131,20 +130,6 @@
 	status = "okay";
 };
 
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	wm8978: codec@1a {
-		compatible = "wlf,wm8978";
-		#sound-dai-cells = <0>;
-		reg = <0x1a>;
-	};
-};
-
 &ohci0 {
 	dr_mode = "otg";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 33ddfd18bd56..c934cd3633a4 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -14,6 +14,21 @@
 / {
 	aliases {
 		serial1 = &scif2;
+		i2c3 = &i2c3;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index df7631fe5fac..55d3b73f84e7 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -43,6 +43,7 @@
 / {
 	aliases {
 		serial1 = &scif1;
+		i2c2 = &i2c2;
 	};
 };
 
@@ -59,6 +60,16 @@
 };
 #endif
 
+&i2c2 {
+	status = "disabled";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
 /*
  * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
-- 
2.17.1