Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, February 22, 2022 12:44 AM > > Hi all, > > This patch series adds pin control support for the Renesas R-Car S4-8 > Soc. It is based on patches in the BSP by LUU HOAI, with many changes > on top (see the individual patches). > > Changes compared to v1[1]: > - Add Reviewed-by, > - Fix whitespace in Makefile, > - Remove GPIO and No-GPIO pins, pin function definitions, and > registers that can only be accessed from the Control Domain, > - Spin off clock and DTS patches into separate series, > - Drop RFC state and widen audience. > > Serial console and I2C have been tested on the Renesas Spider > development board. > > Thanks for your comments! Thank you for the patch! > Geert Uytterhoeven (11): > pinctrl: renesas: Add PORT_GP_CFG_19 macros > pinctrl: renesas: Initial R8A779F0 PFC support > pinctrl: renesas: r8a779f0: Add SCIF pins, groups, and functions I have already reviewed these patches above independently on v1 or v2. > pinctrl: renesas: r8a779f0: Add I2C pins, groups, and functions > pinctrl: renesas: r8a779f0: Add HSCIF pins, groups, and functions > pinctrl: renesas: r8a779f0: Add INTC-EX pins, groups, and function > pinctrl: renesas: r8a779f0: Add MMC pins, groups, and function > pinctrl: renesas: r8a779f0: Add MSIOF pins, groups, and functions > pinctrl: renesas: r8a779f0: Add PCIe pins, groups, and function > pinctrl: renesas: r8a779f0: Add QSPI pins, groups, and functions > pinctrl: renesas: r8a779f0: Add Ethernet pins, groups, and functions These patches (4/12 to 12/12) look good to me. So, for the patches: Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Best regards, Yoshihiro Shimoda
