The sub-board contains three MAX96712 connected to the main-board using
I2C and CSI-2, record the connections. Also enable all nodes (VIN, CSI-2
and ISP) that are part of the downstream video capture pipeline.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
* Changes since v1
- Rebase on latest renesas-drivers.
Hi Geert,
The bindings and the driver itself are now merged upstream so I think
this is ready to be merged as well. With this final patch capture on V3U
can be demonstrated out-of-the box using the MAX9612 self pattern mode.
A simple test procedure,
# Configure media graph
media-ctl -d /dev/media0 -V "'rcar_csi2 feaa0000.csi2':0 [fmt:RGB888_1X24/1920x1080 field:none]"
media-ctl -d /dev/media0 -V "'rcar_isp fed00000.isp':0 [fmt:RGB888_1X24/1920x1080 field:none]"
yavta -s 1920x1080 /dev/video0
v4l2-ctl -v pixelformat=AR24
# Capture checkerboard pattern
yavta -c10 --file=frame-#.bin /dev/video0
# Switch pattern and capture gradients
yavta --set-control '0x009f0903 1' /dev/v4l-subdev6
yavta -c10 --file=frame-#.bin /dev/video0
This series is based and tested on the latest available renesas-drivers,
renesas-drivers-2022-01-11-v5.16.
---
.../dts/renesas/r8a779a0-falcon-csi-dsi.dtsi | 229 ++++++++++++++++++
1 file changed, 229 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
index f791c76f1bcff92f..a3ac35c0eb6908a0 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -34,3 +34,232 @@ eeprom@52 {
pagesize = <8>;
};
};
+
+&i2c1 {
+ gmsl0: gmsl-deserializer@49 {
+ compatible = "maxim,max96712";
+ reg = <0x49>;
+ enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out0: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4b {
+ compatible = "maxim,max96712";
+ reg = <0x4b>;
+ enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ lane-polarities = <0 0 0 0 1>;
+ remote-endpoint = <&csi42_in>;
+ };
+ };
+ };
+ };
+
+ gmsl2: gmsl-deserializer@6b {
+ compatible = "maxim,max96712";
+ reg = <0x6b>;
+ enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96712_out2: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ lane-polarities = <0 0 0 0 1>;
+ remote-endpoint = <&csi43_in>;
+ };
+ };
+ };
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out0>;
+ };
+ };
+ };
+};
+
+&csi42 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi42_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out1>;
+ };
+ };
+ };
+};
+
+&csi43 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi43_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96712_out2>;
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&isp2 {
+ status = "okay";
+};
+
+&isp3 {
+ status = "okay";
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
+
+&vin16 {
+ status = "okay";
+};
+
+&vin17 {
+ status = "okay";
+};
+
+&vin18 {
+ status = "okay";
+};
+
+&vin19 {
+ status = "okay";
+};
+
+&vin20 {
+ status = "okay";
+};
+
+&vin21 {
+ status = "okay";
+};
+
+&vin22 {
+ status = "okay";
+};
+
+&vin23 {
+ status = "okay";
+};
+
+&vin24 {
+ status = "okay";
+};
+
+&vin25 {
+ status = "okay";
+};
+
+&vin26 {
+ status = "okay";
+};
+
+&vin27 {
+ status = "okay";
+};
+
+&vin28 {
+ status = "okay";
+};
+
+&vin29 {
+ status = "okay";
+};
+
+&vin30 {
+ status = "okay";
+};
+
+&vin31 {
+ status = "okay";
+};
--
2.34.1
