Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Thank you for the review.

On Tue, Dec 21, 2021 at 10:19 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Tue, Dec 07, 2021 at 01:23:50AM +0000, Lad Prabhakar wrote:
> > Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
> >
> > The CRU consists of a MIPI CSI-2 block and an Image Processing block.
> > Image Processing block input can be either CSI-2 or parallel input.
> >
> > Based on a patch in the BSP by Hien Huynh
> > <hien.huynh.px@xxxxxxxxxxx>
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  drivers/media/platform/Kconfig                |   1 +
> >  drivers/media/platform/Makefile               |   2 +
> >  drivers/media/platform/rzg2l-cru/Kconfig      |  15 +
> >  drivers/media/platform/rzg2l-cru/Makefile     |   4 +
> >  drivers/media/platform/rzg2l-cru/rzg2l-core.c | 473 ++++++++++++
> >  drivers/media/platform/rzg2l-cru/rzg2l-cru.h  | 244 ++++++
> >  drivers/media/platform/rzg2l-cru/rzg2l-csi2.c | 625 ++++++++++++++++
> >  drivers/media/platform/rzg2l-cru/rzg2l-dma.c  | 703 ++++++++++++++++++
> >  drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c | 361 +++++++++
> >  9 files changed, 2428 insertions(+)
> >  create mode 100644 drivers/media/platform/rzg2l-cru/Kconfig
> >  create mode 100644 drivers/media/platform/rzg2l-cru/Makefile
> >  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-core.c
> >  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-cru.h
> >  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
> >  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-dma.c
> >  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index cf4adc64c953..5059f1b0a6ba 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
> >  source "drivers/media/platform/am437x/Kconfig"
> >  source "drivers/media/platform/xilinx/Kconfig"
> >  source "drivers/media/platform/rcar-vin/Kconfig"
> > +source "drivers/media/platform/rzg2l-cru/Kconfig"
> >  source "drivers/media/platform/atmel/Kconfig"
> >  source "drivers/media/platform/sunxi/Kconfig"
> >
> > diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> > index a148553babfc..51cc0a1a4c94 100644
> > --- a/drivers/media/platform/Makefile
> > +++ b/drivers/media/platform/Makefile
> > @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX)          += xilinx/
> >  obj-$(CONFIG_VIDEO_RCAR_ISP)         += rcar-isp.o
> >  obj-$(CONFIG_VIDEO_RCAR_VIN)         += rcar-vin/
> >
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU)                += rzg2l-cru/
>
> Not something that needs to be done in this patch, but should be create
> a renesas directory and move all drivers for Renesas devices there ?
>
Agreed, will start off with a renesas directory for this driver and
later we can move the rest of the drivers into it.

> > +
> >  obj-$(CONFIG_VIDEO_ATMEL_ISC)                += atmel/
> >  obj-$(CONFIG_VIDEO_ATMEL_ISI)                += atmel/
> >  obj-$(CONFIG_VIDEO_ATMEL_XISC)               += atmel/
> > diff --git a/drivers/media/platform/rzg2l-cru/Kconfig b/drivers/media/platform/rzg2l-cru/Kconfig
> > new file mode 100644
> > index 000000000000..75664be0206d
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/Kconfig
> > @@ -0,0 +1,15 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +config VIDEO_RZG2L_CRU
> > +     tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> > +     depends on VIDEO_V4L2 && OF
> > +     depends on ARCH_R9A07G044 || COMPILE_TEST
> > +     select MEDIA_CONTROLLER
> > +     select VIDEO_V4L2_SUBDEV_API
> > +     select VIDEOBUF2_DMA_CONTIG
> > +     select RESET_CONTROLLER
> > +     select V4L2_FWNODE
> > +     help
> > +       Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
> > +
> > +       To compile this driver as a module, choose M here: the
> > +       module will be called rzg2l-cru.
> > diff --git a/drivers/media/platform/rzg2l-cru/Makefile b/drivers/media/platform/rzg2l-cru/Makefile
> > new file mode 100644
> > index 000000000000..624b431b12b0
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +rzg2l-cru-objs = rzg2l-core.o rzg2l-csi2.o rzg2l-dma.o rzg2l-v4l2.o
> > +
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> > diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/rzg2l-cru/rzg2l-core.c
> > new file mode 100644
> > index 000000000000..11e8f5c03887
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/rzg2l-core.c
> > @@ -0,0 +1,473 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2016 Renesas Electronics Corp.
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/slab.h>
> > +#include <linux/sys_soc.h>
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define v4l2_dev_to_cru(d)   container_of(d, struct rzg2l_cru_dev, v4l2_dev)
> > +
> > +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> > +                                   unsigned int notification)
> > +{
> > +     struct rzg2l_cru_group *group = container_of(link->graph_obj.mdev,
> > +                                             struct rzg2l_cru_group, mdev);
> > +     struct rzg2l_cru_dev *cru = NULL;
> > +     struct video_device *vdev;
> > +     struct media_pad *csi_pad;
> > +     struct media_entity *entity;
> > +     struct v4l2_subdev *sd;
> > +     int ret = 0;
> > +
> > +     ret = v4l2_pipeline_link_notify(link, flags, notification);
> > +     if (ret)
> > +             return ret;
> > +
> > +     /* Only care about link enablement for CRU nodes. */
> > +     if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> > +         !is_media_entity_v4l2_video_device(link->sink->entity))
> > +             return 0;
> > +
> > +     /*
> > +      * Don't allow link changes if any entity in the graph is
> > +      * streaming, modifying the CHSEL register fields can disrupt
> > +      * running streams.
> > +      */
> > +     media_device_for_each_entity(entity, &group->mdev)
> > +             if (entity->stream_count)
> > +                     return -EBUSY;
> > +
> > +     mutex_lock(&group->lock);
> > +     vdev = media_entity_to_video_device(link->sink->entity);
> > +     cru = container_of(vdev, struct rzg2l_cru_dev, vdev);
> > +
> > +     csi_pad = media_entity_remote_pad(&group->cru->vdev.entity.pads[0]);
> > +     if (csi_pad) {
> > +             ret = -EMLINK;
> > +             goto out;
> > +     }
> > +
> > +     sd = media_entity_to_v4l2_subdev(link->source->entity);
> > +     if (group->csi.subdev == sd) {
> > +             cru->group->csi.channel = link->source->index - 1;
> > +             cru->is_csi = true;
> > +     } else {
> > +             ret = -ENODEV;
> > +     }
> > +
> > +out:
> > +     mutex_unlock(&group->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct media_device_ops rzg2l_cru_media_ops = {
> > +     .link_notify = rzg2l_cru_csi2_link_notify,
> > +};
> > +
> > +static void rzg2l_cru_group_put(struct rzg2l_cru_dev *cru)
> > +{
> > +     struct rzg2l_cru_group *group = cru->group;
> > +
> > +     mutex_lock(&group->lock);
> > +     cru->group = NULL;
> > +     cru->v4l2_dev.mdev = NULL;
> > +     mutex_unlock(&group->lock);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Group async notifier
> > + */
> > +
> > +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
> > +{
> > +     struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > +     struct rzg2l_cru_group *group = cru->group;
> > +     unsigned int i;
> > +     int ret;
> > +
> > +     ret = media_device_register(&group->mdev);
> > +     if (ret)
> > +             return ret;
> > +
> > +     ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> > +     if (ret) {
> > +             cru_err(cru, "Failed to register subdev nodes\n");
> > +             return ret;
> > +     }
> > +
> > +     if (!video_is_registered(&cru->vdev)) {
> > +             ret = rzg2l_cru_v4l2_register(cru->group->cru);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> > +     /* Create all media device links between CRU and CSI-2's. */
> > +     for (i = 1; i <= CSI2_VCHANNEL; i++) {
> > +             struct media_entity *source, *sink;
> > +
> > +             source = &cru->group->csi.subdev->entity;
> > +             sink = &cru->group->cru->vdev.entity;
> > +
> > +             ret = media_create_pad_link(source, i, sink, 0, 0);
> > +             if (ret) {
> > +                     cru_err(cru, "Error adding link from %s to %s\n",
> > +                             source->name, sink->name);
> > +                     break;
> > +             }
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> > +                                       struct v4l2_subdev *subdev,
> > +                                       struct v4l2_async_subdev *asd)
> > +{
> > +     struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > +
> > +     if (cru->group->cru)
> > +             rzg2l_cru_v4l2_unregister(cru->group->cru);
> > +
> > +     mutex_lock(&cru->group->lock);
> > +
> > +     if (cru->group->csi.asd == asd) {
> > +             cru->group->csi.subdev = NULL;
> > +             cru_dbg(cru, "Unbind CSI-2 %s\n", subdev->name);
> > +     }
> > +
> > +     mutex_unlock(&cru->group->lock);
> > +
> > +     media_device_unregister(&cru->group->mdev);
> > +}
> > +
> > +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> > +                                     struct v4l2_subdev *subdev,
> > +                                     struct v4l2_async_subdev *asd)
> > +{
> > +     struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > +     unsigned int i;
> > +
> > +     mutex_lock(&cru->group->lock);
> > +
> > +     if (cru->group->csi.asd == asd) {
> > +             cru->group->csi.subdev = subdev;
> > +             cru_dbg(cru, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
> > +     }
> > +
> > +     mutex_unlock(&cru->group->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations
> > +rzg2l_cru_group_notify_ops = {
> > +     .bound = rzg2l_cru_group_notify_bound,
> > +     .unbind = rzg2l_cru_group_notify_unbind,
> > +     .complete = rzg2l_cru_group_notify_complete,
> > +};
> > +
> > +static int rzg2l_cru_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
> > +{
> > +     struct v4l2_fwnode_endpoint vep = {
> > +             .bus_type = V4L2_MBUS_CSI2_DPHY,
> > +     };
> > +     struct fwnode_handle *ep, *fwnode;
> > +     struct v4l2_async_subdev *asd;
> > +     int ret;
> > +
> > +     ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 3, id, 0);
> > +     if (!ep)
> > +             return 0;
> > +
> > +     fwnode = fwnode_graph_get_remote_endpoint(ep);
> > +     ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > +     fwnode_handle_put(ep);
> > +     if (ret) {
> > +             cru_err(cru, "Failed to parse %pOF\n", to_of_node(fwnode));
> > +             ret = -EINVAL;
> > +             goto out;
> > +     }
> > +
> > +     if (!of_device_is_available(to_of_node(fwnode))) {
> > +             cru_dbg(cru, "OF device %pOF disabled, ignoring\n",
> > +                     to_of_node(fwnode));
> > +             ret = -ENOTCONN;
> > +             goto out;
> > +     }
> > +
> > +     asd = v4l2_async_nf_add_fwnode(&cru->group->notifier, fwnode,
> > +                                    struct v4l2_async_subdev);
> > +     if (IS_ERR(asd)) {
> > +             ret = PTR_ERR(asd);
> > +             goto out;
> > +     }
> > +
> > +     cru->group->csi.asd = asd;
> > +
> > +     cru_dbg(cru, "Add group OF device %pOF to slot %u\n",
> > +             to_of_node(fwnode), vep.base.id);
> > +out:
> > +     fwnode_handle_put(fwnode);
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_cru_parse_of_graph(struct rzg2l_cru_dev *cru)
> > +{
> > +     int ret;
> > +
> > +     cru->group->cru = cru;
> > +     v4l2_async_nf_init(&cru->group->notifier);
> > +
> > +     ret = rzg2l_cru_parse_of(cru, 0);
> > +     if (ret)
> > +             return ret;
> > +
> > +     cru->group->notifier.ops = &rzg2l_cru_group_notify_ops;
> > +
> > +     if (list_empty(&cru->group->notifier.asd_list))
> > +             return 0;
> > +
> > +     ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->group->notifier);
> > +     if (ret < 0) {
> > +             cru_err(cru, "Notifier registration failed\n");
> > +             v4l2_async_nf_cleanup(&cru->group->notifier);
> > +             return ret;
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
> > +{
> > +     struct media_device *mdev = NULL;
> > +     const struct of_device_id *match;
> > +     struct rzg2l_cru_group *group;
> > +     int ret;
> > +
> > +     cru->pad.flags = MEDIA_PAD_FL_SINK;
> > +     ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> > +     if (ret)
> > +             return ret;
> > +
> > +     group = kzalloc(sizeof(*group), GFP_KERNEL);
> > +     if (!group)
> > +             return -ENOMEM;
> > +
> > +     mutex_init(&group->lock);
> > +     mdev = &group->mdev;
> > +     mdev->dev = cru->dev;
> > +     mdev->ops = &rzg2l_cru_media_ops;
> > +
> > +     match = of_match_node(cru->dev->driver->of_match_table,
> > +                           cru->dev->of_node);
> > +
> > +     strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> > +     strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> > +     snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> > +              dev_name(mdev->dev));
> > +
> > +     cru->group = group;
> > +     cru->v4l2_dev.mdev = &group->mdev;
> > +
> > +     media_device_init(mdev);
> > +
> > +     ret = rzg2l_cru_parse_of_graph(cru);
> > +     if (ret)
> > +             rzg2l_cru_group_put(cru);
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +     struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
> > +                                              struct rzg2l_cru_dev,
> > +                                              ctrl_handler);
> > +     int ret = 0;
> > +
> > +     switch (ctrl->id) {
> > +     case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
> > +             if (cru->state == STOPPED || cru->state == STOPPING)
> > +                     cru->num_buf = ctrl->val;
> > +             else
> > +                     ret = -EBUSY;
> > +
> > +             break;
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
> > +     .s_ctrl = rzg2l_cru_s_ctrl,
> > +};
> > +
> > +static int rzg2l_cru_probe(struct platform_device *pdev)
> > +{
> > +     struct rzg2l_cru_dev *cru;
> > +     struct v4l2_ctrl *ctrl;
> > +     int irq, ret;
> > +
> > +     cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> > +     if (!cru)
> > +             return -ENOMEM;
> > +
> > +     cru->dev = &pdev->dev;
> > +     cru->info = of_device_get_match_data(&pdev->dev);
> > +
> > +     cru->base = devm_platform_ioremap_resource(pdev, 0);
> > +     if (IS_ERR(cru->base))
> > +             return PTR_ERR(cru->base);
> > +
> > +     irq = platform_get_irq(pdev, 1);
> > +     if (irq < 0)
> > +             return irq;
> > +
> > +     cru->vclk = clk_get(&pdev->dev, "vclk");
> > +     if (IS_ERR(cru->vclk))
> > +             return PTR_ERR(cru->vclk);
> > +
> > +     cru->cmn_restb = devm_reset_control_get_by_index(&pdev->dev, 0);
> > +     if (IS_ERR(cru->cmn_restb)) {
> > +             dev_err(&pdev->dev, "failed to get cpg cmn_restb\n");
> > +             return PTR_ERR(cru->cmn_restb);
> > +     }
> > +     cru->presetn = devm_reset_control_get_by_index(&pdev->dev, 1);
> > +     if (IS_ERR(cru->presetn)) {
> > +             dev_err(&pdev->dev, "failed to get cpg presetn\n");
> > +             return PTR_ERR(cru->presetn);
> > +     }
> > +     cru->aresetn = devm_reset_control_get_by_index(&pdev->dev, 2);
> > +     if (IS_ERR(cru->aresetn)) {
> > +             dev_err(&pdev->dev, "failed to get cpg aresetn\n");
> > +             return PTR_ERR(cru->aresetn);
> > +     }
> > +
> > +     ret = reset_control_deassert(cru->presetn);
> > +     if (ret) {
> > +             cru_err(cru, "failed to deassert presetn\n");
> > +             return ret;
> > +     }
> > +
> > +     ret = rzg2l_cru_dma_register(cru, irq);
> > +     if (ret)
> > +             return ret;
> > +
> > +     platform_set_drvdata(pdev, cru);
> > +
> > +     ret = rzg2l_cru_csi2_init(cru);
> > +     if (ret)
> > +             goto error_dma_unregister;
> > +
> > +     ret = rzg2l_csi2_register(cru);
> > +     if (ret)
> > +             return ret;
>
> As commented in the DT bindings, the CSI-2 receiver seems to be a
> separate IP core, so I think it should be handled by a separate driver.
>
I'll see if the clock can be made as a "shared" and try to split it
into a separate driver.

> > +
> > +     v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
> > +     ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
> > +                              V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> > +                              1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
> > +     if (cru->ctrl_handler.error) {
> > +             dev_err(&pdev->dev, "%s: control initialization error %d\n",
> > +                     __func__, cru->ctrl_handler.error);
> > +             ret = cru->ctrl_handler.error;
> > +             goto free_ctrl;
> > +     }
> > +
> > +     ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
> > +     cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
> > +
> > +     cru->num_buf = HW_BUFFER_DEFAULT;
> > +
> > +     pm_suspend_ignore_children(&pdev->dev, true);
> > +     pm_runtime_enable(&pdev->dev);
> > +
> > +     return 0;
> > +
> > +free_ctrl:
> > +     v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > +error_dma_unregister:
> > +     rzg2l_cru_dma_unregister(cru);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
> > +     .max_width = 2800,
> > +     .max_height = 4096,
> > +};
> > +
> > +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> > +     {
> > +             .compatible = "renesas,rzg2l-cru",
> > +             .data = &rzg2l_cru_info_generic,
> > +     },
> > +     { /* Sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> > +
> > +static int rzg2l_cru_remove(struct platform_device *pdev)
> > +{
> > +     struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> > +     struct rzg2l_cru_group *group = cru->group;
> > +
> > +     pm_runtime_disable(&pdev->dev);
> > +
> > +     rzg2l_cru_v4l2_unregister(cru);
> > +
> > +     v4l2_async_nf_unregister(&group->notifier);
> > +     v4l2_async_nf_cleanup(&group->notifier);
> > +
> > +     media_device_cleanup(&group->mdev);
> > +     mutex_destroy(&group->lock);
> > +     cru->group->cru = NULL;
> > +     cru->group = NULL;
> > +     cru->v4l2_dev.mdev = NULL;
> > +     kfree(group);
> > +
> > +     v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > +     cru->vdev.ctrl_handler = NULL;
> > +
> > +     rzg2l_csi2_unregister(cru);
> > +     rzg2l_cru_dma_unregister(cru);
> > +     reset_control_assert(cru->presetn);
> > +
> > +     return 0;
> > +}
> > +
> > +static struct platform_driver rzg2l_cru_driver = {
> > +     .driver = {
> > +             .name = "rzg2l-cru",
> > +             .of_match_table = rzg2l_cru_of_id_table,
> > +     },
> > +     .probe = rzg2l_cru_probe,
> > +     .remove = rzg2l_cru_remove,
> > +};
> > +
> > +module_platform_driver(rzg2l_cru_driver);
> > +
> > +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/rzg2l-cru/rzg2l-cru.h
> > new file mode 100644
> > index 000000000000..6ec19d5338b4
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/rzg2l-cru.h
> > @@ -0,0 +1,244 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * rzg2l-cru.h
> > + *
> > + * Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +#ifndef __RZG2L_CRU__
> > +#define __RZG2L_CRU__
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-dev.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/videobuf2-v4l2.h>
> > +#include <linux/reset.h>
> > +#include <linux/clk.h>
>
> Please sort the headers alphabetically.
>
Oops missed that will do that.

> > +
> > +/* Number of HW buffers */
> > +#define HW_BUFFER_MAX                8
> > +#define HW_BUFFER_DEFAULT    3
> > +
> > +/* Address alignment mask for HW buffers */
> > +#define HW_BUFFER_MASK               0x1ff
> > +
> > +/* Maximum number of CSI2 virtual channels */
> > +#define CSI2_VCHANNEL                4
> > +
> > +/**
> > + * enum rzg2l_cru_dma_state - DMA states
> > + * @STOPPED:   No operation in progress
> > + * @STARTING:  Capture starting up
> > + * @RUNNING:   Operation in progress have buffers
> > + * @STOPPING:  Stopping operation
> > + */
> > +enum rzg2l_cru_dma_state {
> > +     STOPPED = 0,
> > +     STARTING,
> > +     RUNNING,
> > +     STOPPING,
>
> Those names are too generic and could conflict. Adding a RZG2L_CRU_DMA_
> prefix would help.
>
Ok, I will add the prefix.

> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_video_format - Data format stored in memory
> > + * @fourcc: Pixelformat
> > + * @bpp: Bytes per pixel
> > + */
> > +struct rzg2l_cru_video_format {
> > +     u32 fourcc;
> > +     u8 bpp;
> > +};
>
> You can drop this and use v4l2_format_info().
>
Agreed.

> > +
> > +/**
> > + * struct rzg2l_cru_info - Information about the particular CRU implementation
> > + * @max_width:       max input width the CRU supports
> > + * @max_height:      max input height the CRU supports
> > + */
> > +struct rzg2l_cru_info {
> > +     unsigned int max_width;
> > +     unsigned int max_height;
> > +};
> > +
> > +enum rzg2l_csi2_pads {
> > +     RZG2L_CSI2_SINK = 0,
> > +     RZG2L_CSI2_SOURCE_VC0,
> > +     RZG2L_CSI2_SOURCE_VC1,
> > +     RZG2L_CSI2_SOURCE_VC2,
> > +     RZG2L_CSI2_SOURCE_VC3,
> > +     NR_OF_RZG2L_CSI2_PAD,
> > +};
>
> There should be a single source pad, carrying all virtual channels (and
> data types). Support for virtual channels in V4L2 is under development,
> see https://lore.kernel.org/linux-media/20211130141536.891878-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/T/#t.
>
Ok, I will base my patches on top of this series.

> > +
> > +struct rzg2l_csi2 {
> > +     struct device *dev;
> > +
> > +     struct v4l2_subdev subdev;
> > +     struct media_pad pads[NR_OF_RZG2L_CSI2_PAD];
> > +
> > +     struct v4l2_async_notifier notifier;
> > +     struct v4l2_async_subdev asd;
> > +     struct v4l2_subdev *remote;
> > +
> > +     struct v4l2_mbus_framefmt mf;
>
> If https://lore.kernel.org/linux-media/20211217135022.364954-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/T/#t
> gets merged first, this should be replaced with usage of the active
> subdev state.
>
Thanks for the link. I will keep a watch on the status of it.

> > +
> > +     struct mutex lock;
> > +     int stream_count;
> > +
> > +     unsigned short lanes;
> > +     unsigned long hsfreq;
> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_dev - Renesas CRU device structure
> > + * @dev:             (OF) device
> > + * @base:            device I/O register space remapped to virtual memory
> > + * @info:            info about CRU instance
> > + *
> > + * @vclk:            CRU main clock
> > + * @cmn_restb:               CRU_CMN_RSTB reset line
> > + * @presetn:         CRU_PRESETN reset line
> > + * @aresetn:         CRU_ARESETN reset line
> > + *
> > + * @vdev:            V4L2 video device associated with CRU
> > + * @v4l2_dev:                V4L2 device
> > + * @ctrl_handler:    V4L2 control handler
> > + * @num_buf:         Holds the current number of buffers enabled
> > + * @notifier:                V4L2 asynchronous subdevs notifier
> > + *
> > + * @group:           CSI group
> > + * @pad:             media pad for the video device entity
> > + *
> > + * @lock:            protects @queue
> > + * @queue:           vb2 buffers queue
> > + * @scratch:         cpu address for scratch buffer
> > + * @scratch_phys:    physical address of the scratch buffer
> > + *
> > + * @qlock:           protects @queue_buf, @buf_list, @sequence
> > + *                   @state
> > + * @queue_buf:               Keeps track of buffers given to HW slot
> > + * @buf_list:                list of queued buffers
> > + * @sequence:                V4L2 buffers sequence number
> > + * @state:           keeps track of operation state
> > + *
> > + * @is_csi:          flag to mark the CRU as using a CSI-2 subdevice
> > + * @csi2:            pointer to CSI2 structure
> > + *
> > + * @input_is_yuv:    flag to mark the input format of CRU
> > + * @output_is_yuv:   flag to mark the output format of CRU
> > + *
> > + * @mbus_code:               media bus format code
> > + * @format:          active V4L2 pixel format
> > + *
> > + * @compose:         active composing
> > + * @source:          active size of the video source
> > + * @std:             active video standard of the video source
> > + */
> > +struct rzg2l_cru_dev {
> > +     struct device *dev;
> > +     void __iomem *base;
> > +     const struct rzg2l_cru_info *info;
> > +
> > +     struct clk *vclk;
> > +
> > +     struct reset_control *cmn_restb;
> > +     struct reset_control *presetn;
> > +     struct reset_control *aresetn;
> > +
> > +     struct video_device vdev;
> > +     struct v4l2_device v4l2_dev;
> > +     struct v4l2_ctrl_handler ctrl_handler;
> > +     u8 num_buf;
> > +     struct v4l2_async_notifier notifier;
> > +
> > +     struct rzg2l_cru_group *group;
> > +     struct media_pad pad;
> > +
> > +     struct mutex lock;
> > +     struct vb2_queue queue;
> > +     void *scratch;
> > +     dma_addr_t scratch_phys;
> > +
> > +     spinlock_t qlock;
> > +     struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> > +     struct list_head buf_list;
> > +     unsigned int sequence;
> > +     enum rzg2l_cru_dma_state state;
> > +
> > +     struct rzg2l_csi2 *csi2;
> > +     bool is_csi;
> > +
> > +     bool input_is_yuv;
> > +     bool output_is_yuv;
> > +
> > +     u32 mbus_code;
> > +     struct v4l2_pix_format format;
> > +
> > +     struct v4l2_rect compose;
> > +};
> > +
> > +/* Debug */
> > +#define cru_dbg(d, fmt, arg...)              dev_dbg((d)->dev, fmt, ##arg)
> > +#define cru_info(d, fmt, arg...)     dev_info((d)->dev, fmt, ##arg)
> > +#define cru_warn(d, fmt, arg...)     dev_warn((d)->dev, fmt, ##arg)
> > +#define cru_err(d, fmt, arg...)              dev_err((d)->dev, fmt, ##arg)
>
> I'd use dev_*() directly in the code, wrapper macros make it less
> readable in my opinion.
>
OK.

> > +
> > +/**
> > + * struct rzg2l_cru_group - CRU CSI2 group information
>
> What does this group ? In RZ/G2L there's only one CSI-2 receiver and one
> image processing block as far as I can see.
>
Agreed can be dropped.

> > + * @mdev: media device which represents the group
> > + *
> > + * @lock: protects the count, notifier, vin and csi members
> > + *
> > + * @notifier: group notifier for CSI-2 async subdevices
> > + * @cru: CRU instances which are part of the group
> > + * @csi: array of pairs of fwnode and subdev pointers
> > + *       to all CSI-2 subdevices.
> > + */
> > +struct rzg2l_cru_group {
> > +     struct media_device mdev;
> > +
> > +     struct mutex lock;
> > +     struct v4l2_async_notifier notifier;
> > +     struct rzg2l_cru_dev *cru;
> > +
> > +     struct {
> > +             struct v4l2_async_subdev *asd;
> > +             struct v4l2_subdev *subdev;
> > +             u32 channel;
> > +     } csi;
> > +};
> > +
> > +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> > +{
> > +     iowrite32(value, cru->base + offset);
> > +}
> > +
> > +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> > +{
> > +     return ioread32(cru->base + offset);
> > +}
> > +
> > +static __maybe_unused void rzg2l_cru_set(struct rzg2l_cru_dev *cru, unsigned int reg, u32 set)
> > +{
> > +     rzg2l_cru_write(cru, reg, rzg2l_cru_read(cru, reg) | set);
> > +}
> > +
> > +static __maybe_unused void rzg2l_cru_clr(struct rzg2l_cru_dev *cru, unsigned int reg, u32 clr)
> > +{
> > +     rzg2l_cru_write(cru, reg, rzg2l_cru_read(cru, reg) & ~clr);
> > +}
> > +
> > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +int rzg2l_csi2_register(struct rzg2l_cru_dev *cru);
> > +void rzg2l_csi2_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +const struct rzg2l_cru_video_format
> > +*rzg2l_cru_format_from_pixel(u32 pixelformat);
> > +
> > +#endif
> > diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
> > new file mode 100644
> > index 000000000000..719f3aebf77b
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
> > @@ -0,0 +1,625 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for Renesas RZ/G2L MIPI CSI-2 Receiver
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +#include <linux/sys_soc.h>
> > +#include <linux/units.h>
> > +
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +/* CSI-2 LINK registers */
> > +#define CSI2nMCG                     0x400
> > +#define CSI2nMCG_SDLN                        GENMASK(11, 8)
> > +
> > +#define CSI2nMCT0                    0x410
> > +#define CSI2nMCT0_VDLN(x)            ((x) << 0)
> > +
> > +#define CSI2nMCT2                    0x418
> > +#define CSI2nMCT2_FRRSKW(x)          ((x) << 16)
> > +#define CSI2nMCT2_FRRCLK(x)          ((x) << 0)
> > +
> > +#define CSI2nMCT3                    0x41c
> > +#define CSI2nMCT3_RXEN                       BIT(0)
> > +
> > +#define CSI2nRTCT                    0x428
> > +#define CSI2nRTCT_VSRST                      BIT(0)
> > +
> > +#define CSI2nRTST                    0x42c
> > +#define CSI2nRTST_VSRSTS             BIT(0)
> > +
> > +#define CSI2nDTEL                    0x460
> > +
> > +#define CSI2nDTEH                    0x464
> > +
> > +/* CSI-2 D-PHY registers */
> > +#define CSIDPHYCTRL0                 0x800
> > +#define CSIDPHYCTRL0_EN_LDO1200              BIT(1)
> > +#define CSIDPHYCTRL0_EN_BGR          BIT(0)
> > +
> > +#define CSIDPHYTIM0                  0x804
> > +#define CSIDPHYTIM0_TCLK_MISS(x)     ((x) << 24)
> > +#define CSIDPHYTIM0_T_INIT(x)                ((x) << 0)
> > +
> > +#define CSIDPHYTIM1                  0x808
> > +#define CSIDPHYTIM1_THS_PREPARE(x)   ((x) << 24)
> > +#define CSIDPHYTIM1_TCLK_PREPARE(x)  ((x) << 16)
> > +#define CSIDPHYTIM1_THS_SETTLE(x)    ((x) << 8)
> > +
> > +#define VSRSTS_TIMEOUT_MS            100
> > +#define VSRSTS_RETRIES                       20
> > +
> > +struct timings {
> > +     u32 t_init;
> > +     u32 tclk_miss;
> > +     u32 tclk_settle;
> > +     u32 ths_settle;
> > +     u32 tclk_prepare;
> > +     u32 ths_prepare;
> > +};
> > +
> > +enum dphy_timings {
> > +     TRANSMISSION_RATE_80_MBPS = 0,
> > +     TRANSMISSION_RATE_125_MBPS,
> > +     TRANSMISSION_RATE_250_MBPS,
> > +     TRANSMISSION_RATE_360_MBPS,
> > +     TRANSMISSION_RATE_360_PLUS_MBPS,
> > +};
> > +
> > +static const struct timings global_timings[] = {
> > +     [TRANSMISSION_RATE_80_MBPS] = {
> > +             .t_init = 79801,
> > +             .tclk_miss = 4,
> > +             .tclk_settle = 23,
> > +             .ths_settle = 31,
> > +             .tclk_prepare = 10,
> > +             .ths_prepare = 19,
> > +     },
> > +     [TRANSMISSION_RATE_125_MBPS] = {
> > +             .t_init = 79801,
> > +             .tclk_miss = 4,
> > +             .tclk_settle = 23,
> > +             .ths_settle = 28,
> > +             .tclk_prepare = 10,
> > +             .ths_prepare = 19,
> > +     },
> > +     [TRANSMISSION_RATE_250_MBPS] = {
> > +             .t_init = 79801,
> > +             .tclk_miss = 4,
> > +             .tclk_settle = 23,
> > +             .ths_settle = 22,
> > +             .tclk_prepare = 10,
> > +             .ths_prepare = 16,
> > +     },
> > +     [TRANSMISSION_RATE_360_MBPS] = {
> > +             .t_init = 79801,
> > +             .tclk_miss = 4,
> > +             .tclk_settle = 18,
> > +             .ths_settle = 19,
> > +             .tclk_prepare = 10,
> > +             .ths_prepare = 10,
> > +     },
> > +     [TRANSMISSION_RATE_360_PLUS_MBPS] = {
> > +             .t_init = 79801,
> > +             .tclk_miss = 4,
> > +             .tclk_settle = 18,
> > +             .ths_settle = 18,
> > +             .tclk_prepare = 10,
> > +             .ths_prepare = 10,
> > +     },
> > +};
> > +
> > +struct rzg2l_csi2_format {
> > +     u32 code;
> > +     unsigned int bpp;
> > +};
> > +
> > +static const struct rzg2l_csi2_format rzg2l_csi2_formats[] = {
> > +     { .code = MEDIA_BUS_FMT_UYVY8_2X8,      .bpp = 16 },
>
> CSI-2 should use the _1X16 formats (it's just a convention, neither
> describe exactly how data is transmitted).
>
OK will update it.

> > +};
> > +
> > +static const struct rzg2l_csi2_format *rzg2l_csi2_code_to_fmt(unsigned int code)
> > +{
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < ARRAY_SIZE(rzg2l_csi2_formats); i++)
> > +             if (rzg2l_csi2_formats[i].code == code)
> > +                     return &rzg2l_csi2_formats[i];
> > +
> > +     return NULL;
> > +}
> > +
> > +static inline struct rzg2l_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
> > +{
> > +     return container_of(sd, struct rzg2l_csi2, subdev);
> > +}
> > +
> > +static inline struct rzg2l_csi2 *notifier_to_csi2(struct v4l2_async_notifier *n)
> > +{
> > +     return container_of(n, struct rzg2l_csi2, notifier);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * DPHY setting
> > + */
> > +
> > +static int rzg2l_csi2_dphy_setting(struct rzg2l_cru_dev *cru, bool on)
>
> I'd pass the rzg2l_csi2 pointer to the CSI-2 functions, not the
> rzg2l_cru_dev pointer.
>
Agreed will do that.

> > +{
> > +     struct rzg2l_csi2 *csi2 = cru->csi2;
> > +     int ret = 0;
> > +
> > +     if (on) {
> > +             struct timings dphy_timing;
> > +             u32 dphytim0, dphytim1;
> > +
> > +             /* Release reset state */
> > +             ret = reset_control_deassert(cru->cmn_restb);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             /* Wait until the power stabilizes */
> > +             mdelay(1);
> > +
> > +             /* Set DPHY timing parameters */
> > +             if (csi2->hsfreq <= 80)
> > +                     dphy_timing = global_timings[TRANSMISSION_RATE_80_MBPS];
> > +             else if (csi2->hsfreq > 80 && csi2->hsfreq <= 125)
> > +                     dphy_timing = global_timings[TRANSMISSION_RATE_125_MBPS];
> > +             else if (csi2->hsfreq > 125 && csi2->hsfreq <= 250)
> > +                     dphy_timing = global_timings[TRANSMISSION_RATE_250_MBPS];
> > +             else if (csi2->hsfreq > 250 && csi2->hsfreq <= 360)
> > +                     dphy_timing = global_timings[TRANSMISSION_RATE_360_MBPS];
> > +             else if (csi2->hsfreq > 360 && csi2->hsfreq <= 1500)
> > +                     dphy_timing = global_timings[TRANSMISSION_RATE_360_PLUS_MBPS];
> > +             else
> > +                     return -EINVAL;
> > +
> > +             dphytim0 = CSIDPHYTIM0_TCLK_MISS(dphy_timing.tclk_miss) |
> > +                        CSIDPHYTIM0_T_INIT(dphy_timing.t_init);
> > +             dphytim1 = CSIDPHYTIM1_THS_PREPARE(dphy_timing.ths_prepare) |
> > +                        CSIDPHYTIM1_TCLK_PREPARE(dphy_timing.tclk_prepare) |
> > +                        CSIDPHYTIM1_THS_SETTLE(dphy_timing.ths_settle) |
> > +                        CSIDPHYTIM1_THS_SETTLE(dphy_timing.tclk_settle);
> > +
> > +             rzg2l_cru_write(cru, CSIDPHYTIM0, dphytim0);
> > +             rzg2l_cru_write(cru, CSIDPHYTIM1, dphytim1);
> > +
> > +             /* Set the EN_BGR bit */
> > +             rzg2l_cru_set(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> > +
> > +             /* Delay 20us to be stable */
> > +             usleep_range(20, 40);
> > +
> > +             /* Set the EN_LDO1200 bit */
> > +             rzg2l_cru_set(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> > +
> > +             /* Delay 10us to be stable */
> > +             usleep_range(10, 20);
> > +     } else {
> > +             /* Cancel the EN_LDO1200 register setting */
> > +             rzg2l_cru_clr(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> > +
> > +             /* Cancel the EN_BGR register setting */
> > +             rzg2l_cru_clr(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> > +
> > +             /* Set reset state */
> > +             reset_control_assert(cru->cmn_restb);
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_csi2_calc_mbps(struct rzg2l_csi2 *csi2, unsigned int bpp)
> > +{
> > +     struct v4l2_subdev *source;
> > +     struct v4l2_ctrl *ctrl;
> > +     u64 mbps;
> > +
> > +     if (!csi2->remote)
> > +             return -ENODEV;
> > +
> > +     source = csi2->remote;
> > +
> > +     /* Read the pixel rate control from remote. */
> > +     ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
> > +     if (!ctrl) {
> > +             dev_err(csi2->dev, "no pixel rate control in subdev %s\n",
> > +                     source->name);
> > +             return -EINVAL;
> > +     }
> > +
> > +     /*
> > +      * Calculate hsfreq in Mbps
> > +      * hsfreq = (pixel_rate * bits_per_sample) / number_of_lanes
> > +      */
> > +     mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp;
> > +     do_div(mbps, csi2->lanes * 1000000);
> > +
> > +     return mbps;
> > +}
> > +
> > +static void rzg2l_csi2_stop(struct rzg2l_cru_dev *cru)
> > +{
> > +     unsigned int timeout = VSRSTS_RETRIES;
> > +     struct rzg2l_csi2 *csi2 = cru->csi2;
> > +
> > +     /* Stop DPHY reception */
> > +     rzg2l_csi2_dphy_setting(cru, 0);
> > +
> > +     /* Stop LINK reception */
> > +     rzg2l_cru_clr(cru, CSI2nMCT3, CSI2nMCT3_RXEN);
> > +
> > +     /* Request a software reset of the LINK Video Pixel Interface */
> > +     rzg2l_cru_write(cru, CSI2nRTCT, CSI2nRTCT_VSRST);
> > +
> > +     while (timeout--) {
> > +             /* Make sure that the execution status is not during a reset */
> > +             if (!(rzg2l_cru_read(cru, CSI2nRTST) & CSI2nRTST_VSRSTS))
> > +                     break;
> > +             msleep(VSRSTS_TIMEOUT_MS);
> > +     };
> > +     if (!timeout)
> > +             dev_err(csi2->dev, "CSI2nRTCT_VSRST bit is not cleared\n");
> > +}
> > +
> > +static int rzg2l_csi2_start(struct rzg2l_cru_dev *cru)
> > +{
> > +     unsigned long vclk_rate = clk_get_rate(cru->vclk);
> > +     const struct rzg2l_csi2_format *format;
> > +     struct rzg2l_csi2 *csi2 = cru->csi2;
> > +     int lanes, mbps, ret;
> > +     u32 frrskw, frrclk;
> > +
> > +     dev_dbg(cru->dev, "Input size (%ux%u%c)\n",
> > +             csi2->mf.width, csi2->mf.height,
> > +             csi2->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> > +
> > +     /* Code is validated in set_fmt. */
> > +     format = rzg2l_csi2_code_to_fmt(csi2->mf.code);
> > +
> > +     /* Checking the maximum lanes support for CSI2 module */
> > +     lanes = (rzg2l_cru_read(cru, CSI2nMCG) & CSI2nMCG_SDLN) >> 8;
> > +     if (lanes < csi2->lanes) {
> > +             dev_err(csi2->dev,
> > +                     "Failed to support %d data lanes\n", csi2->lanes);
> > +             return -EINVAL;
> > +     }
> > +
> > +     mbps = rzg2l_csi2_calc_mbps(csi2, format->bpp);
> > +     if (mbps < 0)
> > +             return mbps;
> > +
> > +     csi2->hsfreq = mbps;
> > +
> > +     /* Initialize DPHY */
> > +     ret = rzg2l_csi2_dphy_setting(cru, 1);
> > +     if (ret) {
> > +             rzg2l_csi2_dphy_setting(cru, 0);
> > +             return ret;
> > +     }
> > +
> > +     rzg2l_cru_write(cru, CSI2nMCT0, CSI2nMCT0_VDLN(csi2->lanes));
> > +
> > +     vclk_rate = vclk_rate / HZ_PER_MHZ;
> > +     frrskw = (3 * vclk_rate * 8) / csi2->hsfreq;
> > +     frrclk = frrskw / 2;
> > +     rzg2l_cru_write(cru, CSI2nMCT2,
> > +                     CSI2nMCT2_FRRSKW(frrskw + 1) | CSI2nMCT2_FRRCLK(frrclk + 1));
> > +
> > +     /* Select data type. */
> > +     rzg2l_cru_write(cru, CSI2nDTEL, 0xf778ff0f);
> > +     rzg2l_cru_write(cru, CSI2nDTEH, 0x00ffff1f);
> > +
> > +     /* Enable LINK reception */
> > +     rzg2l_cru_set(cru, CSI2nMCT3, CSI2nMCT3_RXEN);
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_csi2_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +     struct rzg2l_cru_dev *cru = v4l2_get_subdevdata(sd);
> > +     struct rzg2l_csi2 *csi2 = cru->csi2;
> > +     int ret = 0;
> > +
> > +     mutex_lock(&csi2->lock);
> > +
> > +     if (!csi2->remote) {
> > +             ret = -ENODEV;
> > +             goto out;
> > +     }
> > +
> > +     if (enable && csi2->stream_count == 0) {
> > +             ret = rzg2l_csi2_start(cru);
> > +             if (ret)
> > +                     goto out;
> > +
> > +             ret = v4l2_subdev_call(csi2->remote, video, s_stream, 1);
> > +             if (ret) {
> > +                     rzg2l_csi2_stop(cru);
> > +                     goto out;
> > +             }
> > +     } else if (!enable && csi2->stream_count == 1) {
> > +             v4l2_subdev_call(csi2->remote, video, s_stream, 0);
> > +             rzg2l_csi2_stop(cru);
> > +     }
> > +
> > +     csi2->stream_count += enable ? 1 : -1;
> > +out:
> > +     mutex_unlock(&csi2->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_cru_set_pad_format(struct v4l2_subdev *sd,
>
> s/cru/csi2/
>
OK.

> > +                                  struct v4l2_subdev_state *sd_state,
> > +                                  struct v4l2_subdev_format *format)
> > +{
> > +     struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
> > +     struct v4l2_mbus_framefmt *framefmt;
> > +
> > +     mutex_lock(&csi2->lock);
> > +
> > +     if (!rzg2l_csi2_code_to_fmt(format->format.code))
> > +             format->format.code = rzg2l_csi2_formats[0].code;
> > +
> > +     if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > +             csi2->mf = format->format;
> > +     } else {
> > +             framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > +             *framefmt = format->format;
> > +     }
> > +
> > +     mutex_unlock(&csi2->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_csi2_get_pad_format(struct v4l2_subdev *sd,
> > +                                  struct v4l2_subdev_state *sd_state,
> > +                                  struct v4l2_subdev_format *format)
> > +{
> > +     struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
> > +
> > +     mutex_lock(&csi2->lock);
> > +     if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > +             format->format = csi2->mf;
> > +     else
> > +             format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0);
> > +     mutex_unlock(&csi2->lock);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops rzg2l_csi2_video_ops = {
> > +     .s_stream = rzg2l_csi2_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops rzg2l_csi2_pad_ops = {
>
> Could you please also implement .init_cfg() ?
>
Will do.

> > +     .set_fmt = rzg2l_cru_set_pad_format,
> > +     .get_fmt = rzg2l_csi2_get_pad_format,
> > +};
> > +
> > +static const struct v4l2_subdev_ops rzg2l_csi2_subdev_ops = {
> > +     .video  = &rzg2l_csi2_video_ops,
> > +     .pad    = &rzg2l_csi2_pad_ops,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Async handling and registration of subdevices and links.
> > + */
> > +
> > +static int rzg2l_csi2_notify_bound(struct v4l2_async_notifier *notifier,
> > +                                struct v4l2_subdev *subdev,
> > +                                struct v4l2_async_subdev *asd)
> > +{
> > +     struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> > +     int pad;
> > +
> > +     pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> > +                                       MEDIA_PAD_FL_SOURCE);
> > +     if (pad < 0) {
> > +             dev_err(csi2->dev, "Failed to find pad for %s\n", subdev->name);
> > +             return pad;
> > +     }
> > +
> > +     csi2->remote = subdev;
> > +
> > +     dev_dbg(csi2->dev, "Bound %s pad: %d\n", subdev->name, pad);
> > +
> > +     return media_create_pad_link(&subdev->entity, pad,
> > +                                  &csi2->subdev.entity, 0,
> > +                                  MEDIA_LNK_FL_ENABLED |
> > +                                  MEDIA_LNK_FL_IMMUTABLE);
> > +}
> > +
> > +static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
> > +                                  struct v4l2_subdev *subdev,
> > +                                  struct v4l2_async_subdev *asd)
> > +{
> > +     struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> > +
> > +     csi2->remote = NULL;
> > +
> > +     dev_dbg(csi2->dev, "Unbind %s\n", subdev->name);
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations rzg2l_csi2_notify_ops = {
> > +     .bound = rzg2l_csi2_notify_bound,
> > +     .unbind = rzg2l_csi2_notify_unbind,
> > +};
> > +
> > +static int rzg2l_csi2_parse_v4l2(struct rzg2l_cru_dev *cru,
> > +                              struct rzg2l_csi2 *csi2,
> > +                              struct v4l2_fwnode_endpoint *vep)
> > +{
> > +     /* Only port 1 endpoint 0 is valid. */
> > +     if (vep->base.port != 1 || vep->base.id)
> > +             return -ENOTCONN;
> > +
> > +     if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
> > +             dev_err(cru->dev, "Unsupported bus: %u\n", vep->bus_type);
> > +             return -EINVAL;
> > +     }
> > +
> > +     csi2->lanes = vep->bus.mipi_csi2.num_data_lanes;
> > +     if (csi2->lanes != 1 && csi2->lanes != 2 && csi2->lanes != 4) {
> > +             dev_err(cru->dev, "Unsupported number of data-lanes: %u\n",
> > +                     csi2->lanes);
> > +             return -EINVAL;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_csi2_parse_dt(struct rzg2l_cru_dev *cru,
> > +                            struct rzg2l_csi2 *csi2)
> > +{
> > +     struct v4l2_fwnode_endpoint v4l2_ep = {
> > +             .bus_type = V4L2_MBUS_CSI2_DPHY
> > +     };
> > +     struct v4l2_async_subdev *asd;
> > +     struct fwnode_handle *fwnode;
> > +     struct fwnode_handle *ep;
> > +     int ret;
> > +
> > +     ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, 0, 0);
> > +     if (!ep) {
> > +             dev_err(cru->dev, "Not connected to subdevice\n");
> > +             return -EINVAL;
> > +     }
> > +
> > +     ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
> > +     if (ret) {
> > +             dev_err(cru->dev, "Could not parse v4l2 endpoint\n");
> > +             fwnode_handle_put(ep);
> > +             return -EINVAL;
> > +     }
> > +
> > +     ret = rzg2l_csi2_parse_v4l2(cru, csi2, &v4l2_ep);
> > +     if (ret) {
> > +             fwnode_handle_put(ep);
> > +             return ret;
> > +     }
> > +
> > +     fwnode = fwnode_graph_get_remote_endpoint(ep);
> > +     fwnode_handle_put(ep);
> > +
> > +     dev_dbg(cru->dev, "Found '%pOF'\n", to_of_node(fwnode));
> > +
> > +     v4l2_async_nf_init(&csi2->notifier);
> > +     csi2->notifier.ops = &rzg2l_csi2_notify_ops;
> > +
> > +     asd = v4l2_async_nf_add_fwnode(&csi2->notifier, fwnode,
> > +                                    struct v4l2_async_subdev);
> > +     fwnode_handle_put(fwnode);
> > +     if (IS_ERR(asd))
> > +             return PTR_ERR(asd);
> > +
> > +     ret = v4l2_async_subdev_nf_register(&csi2->subdev, &csi2->notifier);
> > +     if (ret)
> > +             v4l2_async_nf_cleanup(&csi2->notifier);
> > +
> > +     return ret;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Platform Device Driver.
> > + */
> > +
> > +static const struct media_entity_operations rzg2l_csi2_entity_ops = {
> > +     .link_validate = v4l2_subdev_link_validate,
> > +};
> > +
> > +int rzg2l_csi2_register(struct rzg2l_cru_dev *cru)
> > +{
> > +     struct device *dev = cru->dev;
> > +     struct rzg2l_csi2 *csi2;
> > +     unsigned int i;
> > +     int ret;
> > +
> > +     csi2 = devm_kzalloc(dev, sizeof(*csi2), GFP_KERNEL);
> > +     if (!csi2)
> > +             return -ENOMEM;
> > +
> > +     csi2->dev = dev;
> > +     cru->csi2 = csi2;
> > +
> > +     mutex_init(&csi2->lock);
> > +     csi2->stream_count = 0;
> > +
> > +     ret = rzg2l_csi2_parse_dt(cru, csi2);
> > +     if (ret)
> > +             goto error_mutex;
> > +
> > +     csi2->subdev.owner = THIS_MODULE;
> > +     csi2->subdev.dev = dev;
> > +     v4l2_subdev_init(&csi2->subdev, &rzg2l_csi2_subdev_ops);
> > +     v4l2_set_subdevdata(&csi2->subdev, cru);
> > +     snprintf(csi2->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
> > +              KBUILD_MODNAME, dev_name(dev));
> > +     csi2->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +
> > +     csi2->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> > +     csi2->subdev.entity.ops = &rzg2l_csi2_entity_ops;
> > +
> > +     csi2->pads[RZG2L_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
> > +     for (i = RZG2L_CSI2_SOURCE_VC0; i < NR_OF_RZG2L_CSI2_PAD; i++)
> > +             csi2->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> > +
> > +     ret = media_entity_pads_init(&csi2->subdev.entity, NR_OF_RZG2L_CSI2_PAD,
> > +                                  csi2->pads);
> > +     if (ret)
> > +             goto error_async;
> > +
> > +     ret = v4l2_async_register_subdev(&csi2->subdev);
> > +     if (ret < 0)
> > +             goto error_async;
> > +
> > +     dev_info(dev, "%d lanes found\n", csi2->lanes);
> > +
> > +     return 0;
> > +
> > +error_async:
> > +     v4l2_async_nf_unregister(&csi2->notifier);
> > +     v4l2_async_nf_cleanup(&csi2->notifier);
> > +error_mutex:
> > +     mutex_destroy(&csi2->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +void rzg2l_csi2_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > +     struct rzg2l_csi2 *csi2;
> > +
> > +     if (!cru->csi2)
> > +             return;
> > +
> > +     csi2 = cru->csi2;
> > +
> > +     v4l2_async_nf_unregister(&csi2->notifier);
> > +     v4l2_async_nf_cleanup(&csi2->notifier);
> > +     v4l2_async_unregister_subdev(&csi2->subdev);
> > +
> > +     mutex_destroy(&csi2->lock);
> > +}
>
> [snip]
>
> > diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> > new file mode 100644
> > index 000000000000..e47f050abba8
> > --- /dev/null
> > +++ b/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> > @@ -0,0 +1,361 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2021 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2016 Renesas Electronics Corp.
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-mc.h>
> > +#include <media/v4l2-rect.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define RZG2L_CRU_DEFAULT_FORMAT     V4L2_PIX_FMT_UYVY
> > +#define RZG2L_CRU_DEFAULT_WIDTH              800
> > +#define RZG2L_CRU_DEFAULT_HEIGHT     600
> > +#define RZG2L_CRU_DEFAULT_FIELD              V4L2_FIELD_NONE
> > +#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Format Conversions
> > + */
> > +
> > +static const struct rzg2l_cru_video_format rzg2l_cru_formats[] = {
> > +     {
> > +             .fourcc                 = V4L2_PIX_FMT_UYVY,
> > +             .bpp                    = 2,
> > +     },
> > +};
> > +
> > +const struct rzg2l_cru_video_format
> > +*rzg2l_cru_format_from_pixel(u32 pixelformat)
> > +{
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> > +             if (rzg2l_cru_formats[i].fourcc == pixelformat)
> > +                     return rzg2l_cru_formats + i;
> > +
> > +     return NULL;
> > +}
> > +
> > +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> > +{
> > +     const struct rzg2l_cru_video_format *fmt;
> > +
> > +     fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> > +
> > +     if (WARN_ON(!fmt))
> > +             return -EINVAL;
> > +
> > +     return pix->width * fmt->bpp;
> > +}
> > +
> > +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> > +{
> > +     return pix->bytesperline * pix->height;
> > +}
> > +
> > +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> > +                                struct v4l2_pix_format *pix)
> > +{
> > +     if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> > +             pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > +
> > +     switch (pix->field) {
> > +     case V4L2_FIELD_TOP:
> > +     case V4L2_FIELD_BOTTOM:
> > +     case V4L2_FIELD_NONE:
> > +     case V4L2_FIELD_INTERLACED_TB:
> > +     case V4L2_FIELD_INTERLACED_BT:
> > +     case V4L2_FIELD_INTERLACED:
> > +             break;
> > +     default:
> > +             pix->field = RZG2L_CRU_DEFAULT_FIELD;
> > +             break;
> > +     }
> > +
> > +     /* Limit to CRU capabilities */
> > +     v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
> > +                           &pix->height, 240, cru->info->max_height, 2, 0);
> > +
> > +     pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> > +     pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> > +
> > +     cru_dbg(cru, "Format %ux%u bpl: %u size: %u\n",
> > +             pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> > +}
> > +
> > +static void rzg2l_cru_mc_try_format(struct rzg2l_cru_dev *cru,
> > +                                 struct v4l2_pix_format *pix)
> > +{
> > +     /*
> > +      * The V4L2 specification clearly documents the colorspace fields
> > +      * as being set by drivers for capture devices. Using the values
> > +      * supplied by userspace thus wouldn't comply with the API. Until
> > +      * the API is updated force fixed values.
> > +      */
> > +     pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > +     pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> > +     pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> > +     pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> > +                                                       pix->ycbcr_enc);
> > +
> > +     rzg2l_cru_format_align(cru, pix);
> > +}
> > +
> > +static int rzg2l_cru_querycap(struct file *file, void *priv,
> > +                           struct v4l2_capability *cap)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > +     strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> > +     strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> > +     snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> > +              dev_name(cru->dev));
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_cru_mc_try_fmt_vid_cap(struct file *file, void *priv,
> > +                                     struct v4l2_format *f)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > +     rzg2l_cru_mc_try_format(cru, &f->fmt.pix);
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_cru_mc_s_fmt_vid_cap(struct file *file, void *priv,
> > +                                   struct v4l2_format *f)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > +     if (vb2_is_busy(&cru->queue))
> > +             return -EBUSY;
> > +
> > +     rzg2l_cru_mc_try_format(cru, &f->fmt.pix);
> > +
> > +     cru->format = f->fmt.pix;
> > +
> > +     cru->compose.top = 0;
> > +     cru->compose.left = 0;
> > +     cru->compose.width = cru->format.width;
> > +     cru->compose.height = cru->format.height;
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> > +                                struct v4l2_format *f)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > +     f->fmt.pix = cru->format;
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> > +                                   struct v4l2_fmtdesc *f)
> > +{
> > +     if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> > +             return -EINVAL;
> > +
> > +     f->pixelformat = rzg2l_cru_formats[f->index].fourcc;
> > +
> > +     return 0;
> > +}
> > +
> > +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> > +                                  const struct v4l2_event_subscription *sub)
> > +{
> > +     switch (sub->type) {
> > +     case V4L2_EVENT_SOURCE_CHANGE:
> > +             return v4l2_event_subscribe(fh, sub, 4, NULL);
> > +     }
> > +     return v4l2_ctrl_subscribe_event(fh, sub);
> > +}
> > +
> > +static const struct v4l2_ioctl_ops rzg2l_cru_mc_ioctl_ops = {
> > +     .vidioc_querycap                = rzg2l_cru_querycap,
> > +     .vidioc_try_fmt_vid_cap         = rzg2l_cru_mc_try_fmt_vid_cap,
>
> No need for "mc_" in the function name.
>
OK, I will drop it.

Cheers,
Prabhakar


> > +     .vidioc_g_fmt_vid_cap           = rzg2l_cru_g_fmt_vid_cap,
> > +     .vidioc_s_fmt_vid_cap           = rzg2l_cru_mc_s_fmt_vid_cap,
> > +     .vidioc_enum_fmt_vid_cap        = rzg2l_cru_enum_fmt_vid_cap,
> > +
> > +     .vidioc_reqbufs                 = vb2_ioctl_reqbufs,
> > +     .vidioc_create_bufs             = vb2_ioctl_create_bufs,
> > +     .vidioc_querybuf                = vb2_ioctl_querybuf,
> > +     .vidioc_qbuf                    = vb2_ioctl_qbuf,
> > +     .vidioc_dqbuf                   = vb2_ioctl_dqbuf,
> > +     .vidioc_expbuf                  = vb2_ioctl_expbuf,
> > +     .vidioc_prepare_buf             = vb2_ioctl_prepare_buf,
> > +     .vidioc_streamon                = vb2_ioctl_streamon,
> > +     .vidioc_streamoff               = vb2_ioctl_streamoff,
> > +
> > +     .vidioc_log_status              = v4l2_ctrl_log_status,
> > +     .vidioc_subscribe_event         = rzg2l_cru_subscribe_event,
> > +     .vidioc_unsubscribe_event       = v4l2_event_unsubscribe,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media controller file operations
> > + */
> > +
> > +static int rzg2l_cru_open(struct file *file)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +     int ret;
> > +
> > +     ret = pm_runtime_resume_and_get(cru->dev);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     ret = mutex_lock_interruptible(&cru->lock);
> > +     if (ret)
> > +             goto err_pm;
> > +
> > +     file->private_data = cru;
> > +     ret = v4l2_fh_open(file);
> > +     if (ret)
> > +             goto err_unlock;
> > +
> > +     ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> > +     if (ret < 0)
> > +             goto err_open;
> > +
> > +     ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
> > +     if (ret)
> > +             goto err_power;
> > +
> > +     mutex_unlock(&cru->lock);
> > +
> > +     return 0;
> > +err_power:
> > +     v4l2_pipeline_pm_put(&cru->vdev.entity);
> > +err_open:
> > +     v4l2_fh_release(file);
> > +err_unlock:
> > +     mutex_unlock(&cru->lock);
> > +err_pm:
> > +     pm_runtime_put(cru->dev);
> > +
> > +     return ret;
> > +}
> > +
> > +static int rzg2l_cru_release(struct file *file)
> > +{
> > +     struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +     int ret;
> > +
> > +     mutex_lock(&cru->lock);
> > +
> > +     /* the release helper will cleanup any on-going streaming. */
> > +     ret = _vb2_fop_release(file, NULL);
> > +
> > +     v4l2_pipeline_pm_put(&cru->vdev.entity);
> > +     pm_runtime_put(cru->dev);
> > +
> > +     mutex_unlock(&cru->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static const struct v4l2_file_operations rzg2l_cru_mc_fops = {
> > +     .owner          = THIS_MODULE,
> > +     .unlocked_ioctl = video_ioctl2,
> > +     .open           = rzg2l_cru_open,
> > +     .release        = rzg2l_cru_release,
> > +     .poll           = vb2_fop_poll,
> > +     .mmap           = vb2_fop_mmap,
> > +     .read           = vb2_fop_read,
> > +};
> > +
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > +     if (!video_is_registered(&cru->vdev))
> > +             return;
> > +
> > +     v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> > +               video_device_node_name(&cru->vdev));
> > +
> > +     /* Checks internally if vdev have been init or not */
> > +     video_unregister_device(&cru->vdev);
> > +}
> > +
> > +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> > +                          unsigned int notification, void *arg)
> > +{
> > +     struct rzg2l_cru_dev *cru =
> > +             container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> > +     struct v4l2_subdev *remote;
> > +     struct media_pad *pad;
> > +
> > +     pad = media_entity_remote_pad(&cru->pad);
> > +     if (!pad)
> > +             return;
> > +
> > +     remote = media_entity_to_v4l2_subdev(pad->entity);
> > +     if (remote != sd)
> > +             return;
> > +
> > +     switch (notification) {
> > +     case V4L2_DEVICE_NOTIFY_EVENT:
> > +             v4l2_event_queue(&cru->vdev, arg);
> > +             break;
> > +     }
> > +}
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> > +{
> > +     struct video_device *vdev = &cru->vdev;
> > +     int ret;
> > +
> > +     cru->v4l2_dev.notify = rzg2l_cru_notify;
> > +
> > +     /* video node */
> > +     vdev->v4l2_dev = &cru->v4l2_dev;
> > +     vdev->queue = &cru->queue;
> > +     snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> > +     vdev->release = video_device_release_empty;
> > +     vdev->lock = &cru->lock;
> > +     vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> > +                         V4L2_CAP_READWRITE;
> > +
> > +     /* Set a default format */
> > +     cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > +     cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> > +     cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> > +     cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> > +     cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > +
> > +     vdev->device_caps |= V4L2_CAP_IO_MC;
> > +     vdev->fops = &rzg2l_cru_mc_fops;
> > +     vdev->ioctl_ops = &rzg2l_cru_mc_ioctl_ops;
> > +
> > +     rzg2l_cru_format_align(cru, &cru->format);
> > +
> > +     ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> > +     if (ret) {
> > +             cru_err(cru, "Failed to register video device\n");
> > +             return ret;
> > +     }
> > +
> > +     video_set_drvdata(&cru->vdev, cru);
> > +
> > +     v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> > +               video_device_node_name(&cru->vdev));
> > +
> > +     return ret;
> > +}
>
> --
> Regards,
>
> Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux