On 12/11/2021 19:44, Biju Das wrote:
> RZ/G2L SoC has Generic Timer Module(a.k.a OSTM) which needs to
> deassert the reset line before accessing any registers.
>
> This patch adds an entry point for RZ/G2L so that we can deassert
> the reset line in probe callback.
What is the connection between adding the reset line control and the
platform driver at the end of the driver ?
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v2->v3:
> * Added reset_control_put() on error path.
> * enabled suppress_bind_attrs in ostm_device_driver structure
> v1->v2:
> * Added reset handling inside ostm_init
> * Used same compatible for builtin driver aswell
> ---
> drivers/clocksource/renesas-ostm.c | 39 +++++++++++++++++++++++++++++-
> 1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
> index 3d06ba66008c..21d1392637b8 100644
> --- a/drivers/clocksource/renesas-ostm.c
> +++ b/drivers/clocksource/renesas-ostm.c
> @@ -9,6 +9,8 @@
> #include <linux/clk.h>
> #include <linux/clockchips.h>
> #include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> #include <linux/sched_clock.h>
> #include <linux/slab.h>
>
> @@ -159,6 +161,7 @@ static int __init ostm_init_clkevt(struct timer_of *to)
>
> static int __init ostm_init(struct device_node *np)
> {
> + struct reset_control *rstc;
> struct timer_of *to;
> int ret;
>
> @@ -166,6 +169,14 @@ static int __init ostm_init(struct device_node *np)
> if (!to)
> return -ENOMEM;
>
> + rstc = of_reset_control_get_optional_exclusive(np, NULL);
> + if (IS_ERR(rstc)) {
> + ret = PTR_ERR(rstc);
> + goto err_free;
> + }
> +
> + reset_control_deassert(rstc);
> +
> to->flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
> if (system_clock) {
> /*
> @@ -178,7 +189,7 @@ static int __init ostm_init(struct device_node *np)
>
> ret = timer_of_init(np, to);
> if (ret)
> - goto err_free;
> + goto err_reset;
>
> /*
> * First probed device will be used as system clocksource. Any
> @@ -203,9 +214,35 @@ static int __init ostm_init(struct device_node *np)
>
> err_cleanup:
> timer_of_cleanup(to);
> +err_reset:
> + reset_control_assert(rstc);
> + reset_control_put(rstc);
> err_free:
> kfree(to);
> return ret;
> }
>
> TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
> +
> +#ifdef CONFIG_ARCH_R9A07G044
> +static int __init ostm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + return ostm_init(dev->of_node);
> +}
> +
> +static const struct of_device_id ostm_of_table[] = {
> + { .compatible = "renesas,ostm", },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver ostm_device_driver = {
> + .driver = {
> + .name = "renesas_ostm",
> + .of_match_table = of_match_ptr(ostm_of_table),
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver_probe(ostm_device_driver, ostm_probe);
> +#endif
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
