[PATCH 3/4] arm64: dts: renesas: rzg2l-smarc: Enable audio

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

Enable audio on RZ/G2L SMARC EVK by linking SSI0 with WM8978
audio CODEC.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 66 ++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 85fd6dbabff2..1791c21dfe74 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -8,6 +8,19 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer cset name='Left Input Mixer L2 Switch' on
+ *	amixer cset name='Right Input Mixer R2 Switch' on
+ *	amixer cset name='Headphone Playback Volume' 100
+ *	amixer cset name='PCM Volume' 100%
+ *	amixer cset name='Input PGA Volume' 25
+ *
+ */
+
 / {
 	aliases {
 		serial0 = &scif0;
@@ -21,6 +34,29 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	audio_mclock: audio_mclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	snd_rzg2l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi0>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_mclock>;
+			sound-dai = <&wm8978>;
+		};
+	};
+
 	usb0_vbus_otg: regulator-usb0-vbus-otg {
 		compatible = "regulator-fixed";
 
@@ -30,6 +66,14 @@
 	};
 };
 
+&audio_clk1{
+	clock-frequency = <11289600>;
+};
+
+&audio_clk2{
+	clock-frequency = <12288000>;
+};
+
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
@@ -90,6 +134,9 @@
 };
 
 &pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
 	i2c0_pins: i2c0 {
 		pins = "RIIC0_SDA", "RIIC0_SCL";
 		input-enable;
@@ -110,6 +157,18 @@
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
 	};
 
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
 	usb0_pins: usb0 {
 		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
 			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
@@ -128,6 +187,13 @@
 	status = "okay";
 };
 
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
-- 
2.17.1