[PATCH 0/4] Add Sound support for RZ/G2L SMARC EVK

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series aims to add sound support on RZ/G2L SMARC EVK.

Audio playback/record tested with 44.1Khz sampling rate.

Going forward we planned to upstream versa3 clock driver[1] and
planned to override the initial values programmed in OTP, so that mclock has 2 clock sources.

Based on the sampling rate versa3 clock driver switch the clock source and 
we can support both 48KHZ and 44.1 KHz as CPU as master.

This patch series based on renesas-devel and depend upon [2]

[1] https://github.com/renesas-rz/rz_linux-cip/blob/rzg2l-cip41/drivers/clk/clk-versaclock3.c

[2]https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=549985

Biju Das (4):
  arm64: dts: renesas: r9a07g044: Add DMA support to SSI
  arm64: dts: renesas: rzg2l-smarc: Add WM8978 sound codec
  arm64: dts: renesas: rzg2l-smarc: Enable audio
  arm64: dts: renesas: rzg2l-smarc: Add Mic routing

 arch/arm64/boot/dts/renesas/r9a07g044.dtsi   | 11 +++
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 79 ++++++++++++++++++++
 2 files changed, 90 insertions(+)

-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux