RE: [PATCH net-next 06/18] ravb: Factorise ptp feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew,

Thanks for the feedback.

> Subject: Re: [PATCH net-next 06/18] ravb: Factorise ptp feature
> 
> On Mon, Jul 26, 2021 at 09:01:29AM +0000, Biju Das wrote:
> > Hi Sergei,
> >
> > Thanks for the feedback.
> >
> > > Subject: Re: [PATCH net-next 06/18] ravb: Factorise ptp feature
> > >
> > > HEllo!
> > >
> > > On 7/22/21 5:13 PM, Biju Das wrote:
> > >
> > > > Gptp is active in CONFIG mode for R-Car Gen3, where as it is not
> > >
> > >    It's gPTP, the manuals say. :-)
> >
> > Ok.
> >
> > >
> > > > active in CONFIG mode for R-Car Gen2. Add feature bits to handle
> > > > both cases.
> > >
> > >    I have no idea why this single diff requires 2 fetaure bits....
> >
> > Basically this is a HW feature.
> >
> > 1) for R-Car Gen3, gPTP is active in config mode (R-Car Gen3)
> > 2) for R-Car Gen2, gPTP is not active in config mode (R-Car Gen2)
> > 3) RZ/G2L does not support ptp feature.
> 
> This is useful information to put in he commit message. The commit message
> should answer the question "Why is this change being made?", since what is
> being changed should be obvious from the patch.

OK. will add this in commit description.

Regards,
Biju

> 
>       Andrew




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux