Re: [PATCH v3 2/4] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 26, 2021 at 4:25 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> On Wed, Jul 21, 2021 at 9:16 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:

...

> > +#define RZG2L_GPIO_PORT_GET_PINCNT(x)  (((x) >> 28) & 0x7)
> > +#define RZG2L_GPIO_PORT_GET_INDEX(x)   ((((x) & GENMASK(27, 20)) >> 20) & 0x7f)

It's funny one of them uses style "a" (no GENMASK() use), another
style "b" (GENMASK() is in use). I suggest being consistent: either
drop GENMASK() everywhere, or use them in all suitable places.

> > +#define RZG2L_SINGLE_PIN_GET_PORT(x)   (((x) >> 24) & 0x7f)
> > +#define RZG2L_SINGLE_PIN_GET_BIT(x)    ((((x) & GENMASK(23, 20)) >> 20) & 0x7)

Ditto.

-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux