Re: [RFC PATCH 01/15] dt-bindings: display: bridge: Add binding for R-Car MIPI DSI/CSI-2 TX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/06/2021 14:12, Geert Uytterhoeven wrote:
> Hi Kieran,
> 
> On Wed, Jun 23, 2021 at 11:06 AM Kieran Bingham
> <kieran.bingham@xxxxxxxxxxxxxxxx> wrote:
>> On 23/06/2021 04:46, Laurent Pinchart wrote:
>>> The R-Car MIPI DSI/CSI-2 TX is embedded in the Renesas R-Car V3U SoC. It
>>> can operate in either DSI or CSI-2 mode, with up to four data lanes.
>>>
>>> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>>> ---
>>>  .../display/bridge/renesas,dsi-csi2-tx.yaml   | 118 ++++++++++++++++++
>>>  1 file changed, 118 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
>>> new file mode 100644
>>> index 000000000000..7e1b606a65ea
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
>>> @@ -0,0 +1,118 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Renesas R-Car MIPI DSI/CSI-2 Encoder
>>> +
>>> +maintainers:
>>> +  - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>>> +
>>> +description: |
>>> +  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
>>> +  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
>>> +  to four data lanes.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - renesas,r8a779a0-dsi-csi2-tx # for V3U
>>
>> Only a potential nit ...
>>
>> Is it worth moving the "# for V3U" over a bit to allow for extended
>> compatibles in the future without re-aligning the table?
>>
>> Looks like 37 chars before it currently, it could at least move to
>> position 40.
> 
> Happy predicting the future ;-)
> 
> Did you take into account adding items and/or oneOf, which will
> impact alignment, too?

Maybe it should be way over at 60 chars then ;-)

Not a big issue, I don't mind either way, I'd just indent a little to
try to save when someone adds small updates that then requires a big
table change.


Ps. .. the lottery numbers this week are ...


> Gr{oetje,eeting}s,
> 
>                         Geert
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux