dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-mxs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index f97243f02231..864a3f1bd4e1 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -290,14 +290,14 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, select_init_dma_fail: dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); select_init_pio_fail: - dmaengine_terminate_all(i2c->dmach); + dmaengine_terminate_sync(i2c->dmach); return -EINVAL; /* Write failpath. */ write_init_dma_fail: dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); write_init_pio_fail: - dmaengine_terminate_all(i2c->dmach); + dmaengine_terminate_sync(i2c->dmach); return -EINVAL; } -- 2.30.2
