Re: [PATCH v3 0/4] Converter R-Car DU to the DRM bridge connector helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On 20/05/2021 07:50, Laurent Pinchart wrote:
> Hello,
> 
> This patch series converts the R-Car DU driver to use the DRM bridge
> connector helper drm_bridge_connector_init().
> 
> The bulk of the v1 series was converting the adv7511, simple-bridge and
> dw-hdmi drivers to make connector creation optional (through the
> DRM_BRIDGE_ATTACH_NO_CONNECTOR flag), and have already been merged. v2
> included the remaining patches and has bitrotten. v3 rebased the code
> and should be ready for merge.
> 
> Patch 1/4 adds support to the dw-hdmi driver to attach to a downstream
> bridge if one is specified in DT. As the DT port number corresponding to
> the video output differs between platforms that integrate the dw-hdmi
> (some of them even don't have a video output port, which should probably
> be fixed, but that's out of scope for this series), the port number has
> to be specified by the platform glue layer.
> 
> Patch 2/4 then addresses the rcar-lvds driver. Instead of implementing
> direct support for DRM_BRIDGE_ATTACH_NO_CONNECTOR, it simply removes
> code that shouldn't have been in the driver in the first place by
> switching to the panel bridge helper.
> 
> Patch 3/4 specifies the port number in the R-Car dw-hdmi glue layer, as
> required by 1/4.
> 
> Patch 4/4 finally makes use of the drm_bridge_connector_init() helper.
> 
> The series has been tested on the Renesas R-Car Salvator-XS and Draak
> boards with the VGA, HDMI and LVDS outputs.

I'll start here,

This series fixes the connector issue I had on V3U, and removes the need
for me to carry a workaround. So that's excellent ;-)

For the series,

Tested-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> (on V3U)

> 
> Laurent Pinchart (4):
>   drm: bridge: dw-hdmi: Attach to next bridge if available
>   drm: rcar-du: lvds: Convert to DRM panel bridge helper
>   drm: rcar-du: dw-hdmi: Set output port number
>   drm: rcar-du: Use drm_bridge_connector_init() helper
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c |  54 +++++++++-
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  26 ++++-
>  drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c    |   1 +
>  drivers/gpu/drm/rcar-du/rcar_lvds.c       | 120 +++-------------------
>  include/drm/bridge/dw_hdmi.h              |   2 +
>  5 files changed, 89 insertions(+), 114 deletions(-)
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux