This patch adds OTG support for RZ/G2L SoC.
RZ/G2L USB2.0 phy is compatible with rcar gen3, but it uses
line ctrl register for OTG_ID pin changes. Apart from this
it uses a different OTG-BC interrupt bit for device recognition.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 63 ++++++++++++++++++------
1 file changed, 48 insertions(+), 15 deletions(-)
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index fbc55232120e..aff0749be65d 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -22,6 +22,7 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/string.h>
+#include <linux/sys_soc.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
@@ -64,6 +65,7 @@
/* VBCTRL */
#define USB2_VBCTRL_OCCLREN BIT(16)
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
+#define USB2_VBCTRL_VBOUT BIT(0)
/* LINECTRL1 */
#define USB2_LINECTRL1_DPRPD_EN BIT(19)
@@ -78,6 +80,10 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
+/* RZ/G2L specific */
+#define USB2_OBINT_IDCHG_EN BIT(0)
+#define USB2_LINECTRL1_USB2_IDMON BIT(0)
+
#define NUM_OF_PHYS 4
enum rcar_gen3_phy_index {
PHY_INDEX_BOTH_HC,
@@ -112,9 +118,11 @@ struct rcar_gen3_chan {
struct mutex lock; /* protects rphys[...].powered */
enum usb_dr_mode dr_mode;
int irq;
+ u32 obint_enable_bits;
bool extcon_host;
bool is_otg_channel;
bool uses_otg_pins;
+ bool soc_no_adp_ctrl;
};
/*
@@ -172,14 +180,22 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
void __iomem *usb2_base = ch->base;
- u32 val = readl(usb2_base + USB2_ADPCTRL);
+ u32 vbus_ctrl_reg = USB2_ADPCTRL;
+ u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
+ u32 val;
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+ if (ch->soc_no_adp_ctrl) {
+ vbus_ctrl_reg = USB2_VBCTRL;
+ vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+ }
+
+ val = readl(usb2_base + vbus_ctrl_reg);
if (vbus)
- val |= USB2_ADPCTRL_DRVVBUS;
+ val |= vbus_ctrl_val;
else
- val &= ~USB2_ADPCTRL_DRVVBUS;
- writel(val, usb2_base + USB2_ADPCTRL);
+ val &= ~vbus_ctrl_val;
+ writel(val, usb2_base + vbus_ctrl_reg);
}
static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
@@ -188,9 +204,9 @@ static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
u32 val = readl(usb2_base + USB2_OBINTEN);
if (ch->uses_otg_pins && enable)
- val |= USB2_OBINT_BITS;
+ val |= ch->obint_enable_bits;
else
- val &= ~USB2_OBINT_BITS;
+ val &= ~ch->obint_enable_bits;
writel(val, usb2_base + USB2_OBINTEN);
}
@@ -252,6 +268,9 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
if (!ch->uses_otg_pins)
return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
+ if (ch->soc_no_adp_ctrl)
+ return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON);
+
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
@@ -376,16 +395,17 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
- val = readl(usb2_base + USB2_VBCTRL);
- val &= ~USB2_VBCTRL_OCCLREN;
- writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
- val = readl(usb2_base + USB2_ADPCTRL);
- writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
-
+ if (!ch->soc_no_adp_ctrl) {
+ val = readl(usb2_base + USB2_VBCTRL);
+ val &= ~USB2_VBCTRL_OCCLREN;
+ writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+ val = readl(usb2_base + USB2_ADPCTRL);
+ writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+ }
msleep(20);
writel(0xffffffff, usb2_base + USB2_OBINTSTA);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN);
rcar_gen3_device_recognition(ch);
}
@@ -397,9 +417,9 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
- if (status & USB2_OBINT_BITS) {
+ if (status & ch->obint_enable_bits) {
dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA);
rcar_gen3_device_recognition(ch);
ret = IRQ_HANDLED;
}
@@ -535,6 +555,11 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
.owner = THIS_MODULE,
};
+static const struct soc_device_attribute soc_no_adp_ctrl[] = {
+ { .soc_id = "r9a07g044", .data = (void *)true },
+ { /* Sentinel */ }
+};
+
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a77470",
@@ -613,6 +638,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
struct phy_provider *provider;
const struct phy_ops *phy_usb2_ops;
int ret = 0, i;
+ const struct soc_device_attribute *attr;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@@ -627,6 +653,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (IS_ERR(channel->base))
return PTR_ERR(channel->base);
+ channel->obint_enable_bits = USB2_OBINT_SESSVLDCHG | USB2_OBINT_IDDIGCHG;
/* get irq number here and request_irq for OTG in phy_init */
channel->irq = platform_get_irq_optional(pdev, 0);
channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
@@ -634,6 +661,12 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
int ret;
channel->is_otg_channel = true;
+ attr = soc_device_match(soc_no_adp_ctrl);
+ if (attr) {
+ channel->soc_no_adp_ctrl = attr->data;
+ channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
+ }
+
channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
"renesas,no-otg-pins");
channel->extcon = devm_extcon_dev_allocate(dev,
--
2.17.1
