RE: [PATCH 3/5] i2c: riic: Add RZ/G2L support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for the feedback.

> -----Original Message-----
> Subject: Re: [PATCH 3/5] i2c: riic: Add RZ/G2L support
> 
> Hi Biju,
> 
> On Fri, Jun 11, 2021 at 6:56 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> wrote:
> > RZ/G2L i2c controller is compatible with RZ/A i2c controller.
> > By default IP is in reset state, so need to perform release reset
> > before accessing any register.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -941,6 +941,7 @@ config I2C_QUP
> >  config I2C_RIIC
> >         tristate "Renesas RIIC adapter"
> >         depends on ARCH_RENESAS || COMPILE_TEST
> > +       select RESET_CONTROLLER
> 
> if ARCH_R9A07G044?

OK,Agreed.

> 
> > --- a/drivers/i2c/busses/i2c-riic.c
> > +++ b/drivers/i2c/busses/i2c-riic.c
> _kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
> >         if (!riic)
> > @@ -412,6 +421,17 @@ static int riic_i2c_probe(struct platform_device
> *pdev)
> >                 return PTR_ERR(riic->clk);
> >         }
> >
> > +       type = (enum riic_type)of_device_get_match_data(&pdev->dev);
> > +       if (type == RIIC_RZ_G2L) {
> > +               rstc = devm_reset_control_get(&pdev->dev, NULL);
> > +               if (IS_ERR(rstc)) {
> > +                       dev_err(&pdev->dev, "Error: missing reset
> ctrl\n");
> > +                       return PTR_ERR(rstc);
> > +               }
> > +
> > +               reset_control_deassert(rstc);
> 
> Just wondering: does it harm if the driver is unloaded or unbounded, and
> rebound while the I2C controller is not in reset state?

I have tested and it works after unloading and reloading it again.

Cheers,
Biju

> 
> > +       }
> > +
> >         for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
> >                 res = platform_get_resource(pdev, IORESOURCE_IRQ,
> riic_irqs[i].res_num);
> >                 if (!res)
> > @@ -472,6 +492,7 @@ static int riic_i2c_remove(struct platform_device
> > *pdev)  }
> >
> >  static const struct of_device_id riic_i2c_dt_ids[] = {
> > +       { .compatible = "renesas,riic-r9a07g044", .data = (void
> > + *)RIIC_RZ_G2L },
> >         { .compatible = "renesas,riic-rz" },
> 
> Please fill in .data, to avoid relying implicitly on RIIC_RZ_A being zero.
> 
> >         { /* Sentinel */ },
> >  };
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux