According to Table 30 ("DVFS_MoniVDAC [6:0] Setting Table") in the
BD9571MWV-M Datasheet Rev. 002, the valid voltage range is 600..1100 mV
(settings 0x3c..0x6e). While the lower limit is taken into account (by
setting regulator_desc.linear_min_sel to 0x3c), the upper limit is not.
Fix this by reducing regulator_desc.n_voltages from 0x80 to 0x6f.
Fixes: e85c5a153fe237f2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/regulator/bd9571mwv-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index 7b0cd08db4462395..13393cdc6be1497e 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -125,7 +125,7 @@ static const struct regulator_ops vid_ops = {
static const struct regulator_desc regulators[] = {
BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
- 0x80, 600000, 10000, 0x3c),
+ 0x6f, 600000, 10000, 0x3c),
BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,
16, 1625000, 25000, 0),
BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf,
@@ -134,7 +134,7 @@ static const struct regulator_desc regulators[] = {
11, 2800000, 100000, 0),
BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops,
BD9571MWV_DVFS_MONIVDAC, 0x7f,
- 0x80, 600000, 10000, 0x3c),
+ 0x6f, 600000, 10000, 0x3c),
};
#ifdef CONFIG_PM_SLEEP
--
2.25.1
