If a regulator fails to register, the driver prints an error message
like:
bd9571mwv-regulator bd9571mwv-regulator.6.auto: failed to register bd9571mwv-regulator regulator
However, the platform device's name is already printed as part of
dev_err(), and does not allow the user to distinguish among the various
regulators that are part of the PMIC.
Fix this by printing regulator_desc.name instead, to change the message
like:
bd9571mwv-regulator bd9571mwv-regulator.6.auto: failed to register DVFS regulator
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/regulator/bd9571mwv-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index 13393cdc6be1497e..a4d406022587d59d 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -301,7 +301,7 @@ static int bd9571mwv_regulator_probe(struct platform_device *pdev)
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s regulator\n",
- pdev->name);
+ regulators[i].name);
return PTR_ERR(rdev);
}
}
--
2.25.1
