RE: [PATCH 4/7] misc: Add driver for DAB IP found on Renesas R-Car devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ezequiel,


Thanks for your feedback!

> From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
> Sent: 02 March 2021 11:17
> Subject: Re: [PATCH 4/7] misc: Add driver for DAB IP found on Renesas R-
> Car devices
> 
> Hello everyone,
> 
> On Mon, 1 Mar 2021 at 14:36, Fabrizio Castro
> <fabrizio.castro.jz@xxxxxxxxxxx> wrote:
> >
> > Hi Arnd,
> >
> > Thanks for your feedback!
> >
> > > From: Arnd Bergmann <arnd@xxxxxxxxxx>
> > > Sent: 26 February 2021 10:38
> > > Subject: Re: [PATCH 4/7] misc: Add driver for DAB IP found on Renesas
> R-
> > > Car devices
> > >
> > > On Thu, Feb 25, 2021 at 11:51 PM Fabrizio Castro
> > > <fabrizio.castro.jz@xxxxxxxxxxx> wrote:
> > > >
> > > > The DAB hardware accelerator found on R-Car E3 and R-Car M3-N
> devices is
> > > > a hardware accelerator for software DAB demodulators.
> > > > It consists of one FFT (Fast Fourier Transform) module and one
> decoder
> > > > module, compatible with DAB specification (ETSI EN 300 401 and
> > > > ETSI TS 102 563).
> > > > The decoder module can perform FIC decoding and MSC decoding
> processing
> > > > from de-puncture to final decoded result.
> > > >
> > > > This patch adds a device driver to support the FFT module only.
> > > >
> > > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> > > > ---
> > > >  MAINTAINERS                      |   7 ++
> > > >  drivers/misc/Kconfig             |   1 +
> > > >  drivers/misc/Makefile            |   1 +
> > > >  drivers/misc/rcar_dab/Kconfig    |  11 ++
> > > >  drivers/misc/rcar_dab/Makefile   |   8 ++
> > > >  drivers/misc/rcar_dab/rcar_dev.c | 176
> +++++++++++++++++++++++++++++++
> > > >  drivers/misc/rcar_dab/rcar_dev.h | 116 ++++++++++++++++++++
> > > >  drivers/misc/rcar_dab/rcar_fft.c | 160 ++++++++++++++++++++++++++++
> > > >  include/uapi/linux/rcar_dab.h    |  35 ++++++
> > >
> > > Can you explain why this is not in drivers/media/?
> >
> > I wasn't entirely sure were to put it to be honest as I couldn't find
> > anything similar, that's why "misc" for v1, to mainly get a feedback
> > and advice.
> >
> > >
> > > I don't think we want a custom ioctl interface for a device that
> > > implements
> > > a generic specification. My first feeling would be that this should
> not
> > > have a user-level API but instead get called by the DAB radio driver.
> >
> > I hear you, the trouble is that the modules of this IP should be seen
> > as part of a SW and HW processing pipeline.
> > Some of the SW components of the pipeline can be proprietary, and
> > unfortunately we don't have access (yet) to a framework that allows us
> to
> > test and demonstrate the whole pipeline, for the moment we can only test
> > things in isolation. It'll take us a while to come up with a full
> solution
> > (or to have access to one), and in the meantime our SoCs come with an IP
> > that can't be used because there is no driver for it (yet).
> >
> > After discussing things further with Geert and Laurent, I think they
> > are right in saying that the best path for this is probably to add this
> > driver under "drivers/staging" as an interim solution, so that the IP
> will
> > be accessible by developers, and when we have everything we need (a
> fully
> > fledged processing framework), we will able to integrate it better with
> > the other components (if possible).
> >
> > >
> > > What is the intended usage model here? I assume the idea is to
> > > use it in an application that receives audio or metadata from DAB.
> > > What driver do you use for that?
> >
> > This IP is similar to a DMA to some extent, in the sense that it takes
> > input data from a buffer in memory and it writes output data onto a
> buffer
> > in memory, and of course it does some processing in between.
> 
> That sounds like something that can fit V4L2 MEM2MEM driver.
> You queue two buffers and an operation, and then run a job.

V4L2 MEM2MEM seems good for this in general, however the DAB IP is going
to be shared by multiple processing pipelines (as usually we have several
DRIF interfaces, and only 1 DAB IP), and for what concerns FFT specifically
there is only 1 FFT module inside the DAB IP.
My understanding is that the capabilities of V4L2 MEM2MEM devices are
configured for the specific pipeline, but in the this context user space
would have to continuously switch the capabilities of the DAB IP (at the
right moment) to allow processing for data streams requiring different
capabilities.

Am I wrong?

> 
> > It's not directly connected to any other Radio related IP.
> > The user space application can read DAB IQ samples from the R-Car DRIF
> > interface (via driver drivers/media/platform/rcar_drif.c, or from other
> > sources since this IP is decoupled from DRIF), and then when it's time
> > to accelerate FFT, FIC, or MSC, it can request services to the DAB IP,
> so
> > that the app can go on and use the processor to do some work, while the
> DAB
> > IP processes things.
> > A framework to connect and exchange processing blocks (either SW or HW)
> and
> > interfaces is therefore vital to properly place a kernel implementation
> > in the great scheme of things, in its absence a simple driver can help
> 
> I'm not entirely sure we are missing a framework. What's missing in
> V4L2 MEM2MEM?

I was referring to a user space framework (I should have been more specific
with my previous email).

> 
> Before considering drivers/staging, it would be interesting to figure
> out if V4L2 can do it as-is, and if not, discuss what's missing.

I think an interim solution would allow us and users to evaluate things a
little bit better, so that we can integrate this IP with V4L2 later on.

Thanks,
Fab

> 
> Thanks,
> Ezequiel




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux