Because the datasheet is ambigious, copy over the reset values from the
latest BSP.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
While looking for a problem when obtaining the reset GPIO for RAVB, I
noticed this difference and so send this patch as a notification. It
sadly did not fix my RAVB problem, so I'll report it with the RAVB
patches there. I didn't find a map from "pfc-clocks" to "GPIO block"
yet, so this is all very confusing without it.
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 2c7bb1503cda..16c64ec548df 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -110,7 +110,7 @@ gpio0: gpio@e6058180 {
interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 916>;
+ resets = <&cpg 1331>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 0 28>;
@@ -124,7 +124,7 @@ gpio1: gpio@e6050180 {
interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 915>;
+ resets = <&cpg 1330>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 32 31>;
@@ -138,7 +138,7 @@ gpio2: gpio@e6050980 {
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 915>;
+ resets = <&cpg 1330>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 64 25>;
@@ -152,7 +152,7 @@ gpio3: gpio@e6058980 {
interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 916>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 916>;
+ resets = <&cpg 1331>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 96 17>;
@@ -166,7 +166,7 @@ gpio4: gpio@e6060180 {
interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 917>;
+ resets = <&cpg 1400>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 128 27>;
@@ -180,7 +180,7 @@ gpio5: gpio@e6060980 {
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 917>;
+ resets = <&cpg 1400>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 160 21>;
@@ -194,7 +194,7 @@ gpio6: gpio@e6068180 {
interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 1401>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 192 21>;
@@ -208,7 +208,7 @@ gpio7: gpio@e6068980 {
interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 1401>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 224 21>;
@@ -222,7 +222,7 @@ gpio8: gpio@e6069180 {
interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 1401>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 256 21>;
@@ -236,7 +236,7 @@ gpio9: gpio@e6069980 {
interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 918>;
+ resets = <&cpg 1401>;
gpio-controller;
#gpio-cells = <2>;
// gpio-ranges = <&pfc 0 288 21>;
--
2.29.2
