[PATCH 2/3] mmc: renesas_sdhi: don't hardcode SDIF values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use a macro to name the hardcoded values. Also, move the SDIF register
definition into the SDHI driver because this is an SDHI extension.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/renesas_sdhi_core.c | 7 +++++--
 drivers/mmc/host/tmio_mmc.h          | 1 -
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index b3eb0182c4af..55633826d38c 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -49,6 +49,9 @@
 #define HOST_MODE_GEN3_32BIT	(HOST_MODE_GEN3_WMODE | HOST_MODE_GEN3_BUSWIDTH)
 #define HOST_MODE_GEN3_64BIT	0
 
+#define CTL_SDIF_MODE	0xe6
+#define SDIF_MODE_HS400		BIT(0)
+
 #define SDHI_VER_GEN2_SDR50	0x490c
 #define SDHI_VER_RZ_A1		0x820b
 /* very old datasheets said 0x490c for SDR104, too. They are wrong! */
@@ -381,7 +384,7 @@ static void renesas_sdhi_hs400_complete(struct mmc_host *mmc)
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 
 	/* Set HS400 mode */
-	sd_ctrl_write16(host, CTL_SDIF_MODE, 0x0001 |
+	sd_ctrl_write16(host, CTL_SDIF_MODE, SDIF_MODE_HS400 |
 			sd_ctrl_read16(host, CTL_SDIF_MODE));
 
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF,
@@ -529,7 +532,7 @@ static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host,
 			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 
 	/* Reset HS400 mode */
-	sd_ctrl_write16(host, CTL_SDIF_MODE, ~0x0001 &
+	sd_ctrl_write16(host, CTL_SDIF_MODE, ~SDIF_MODE_HS400 &
 			sd_ctrl_read16(host, CTL_SDIF_MODE));
 
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9546e542619c..7ff41185896a 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -42,7 +42,6 @@
 #define CTL_DMA_ENABLE 0xd8
 #define CTL_RESET_SD 0xe0
 #define CTL_VERSION 0xe2
-#define CTL_SDIF_MODE 0xe6
 
 /* Definitions for values the CTL_STOP_INTERNAL_ACTION register can take */
 #define TMIO_STOP_STP		BIT(0)
-- 
2.28.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux