Re: [PATCH 0/3] Fixes for stop monitoring disabled devices series

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2020-07-03 at 14:05 +0200, Daniel Lezcano wrote:
> On 03/07/2020 13:57, Andrzej Pietrasiewicz wrote:
> > Hi,
> > 
> > W dniu 03.07.2020 o 13:06, Daniel Lezcano pisze:
> > > On 03/07/2020 12:43, Andrzej Pietrasiewicz wrote:
> > > > This short series contains fixes for "Stop monitoring disabled
> > > > devices"
> > > > series https://www.spinics.net/lists/arm-kernel/msg817861.html
> > > > 
> > > > Invocation of thermal_zone_device_is_enabled() in acpi/thermal
> > > > is now
> > > > redundant, because thermal_zone_device_update() now is capable
> > > > of
> > > > handling disabled devices.
> > > > 
> > > > In imx's ->get_temp() the lock must not be taken, otherwise a
> > > > deadlock
> > > > happens. The decision whether explicitly running a measurement
> > > > cycle
> > > > is needed is taken based on driver's local irq_enabled
> > > > variable.
> > > > 
> > > > Finally, thermal_zone_device_is_enabled() is made available to
> > > > the
> > > > core only, as there are no driver users of it.
> > > > 
> > > > Andrzej Pietrasiewicz (3):
> > > >    acpi: thermal: Don't call thermal_zone_device_is_enabled()
> > > >    thermal: imx: Use driver's local data to decide whether to
> > > > run a
> > > >      measurement
> > > >    thermal: Make thermal_zone_device_is_enabled() available to
> > > > core only
> > > > 
> > > >   drivers/acpi/thermal.c         | 3 ---
> > > >   drivers/thermal/imx_thermal.c  | 7 ++++---
> > > >   drivers/thermal/thermal_core.c | 1 -
> > > >   drivers/thermal/thermal_core.h | 2 ++
> > > >   include/linux/thermal.h        | 5 -----
> > > >   5 files changed, 6 insertions(+), 12 deletions(-)
> > > 
> > > Is this series easily merge-able with the other series?
> > > 
> > 
> > So-so.
> > 
> > Some simple conflicts needed to be resolved.
> > 
> > I have created a branch for you to look at and decide
> > how far off it is from the original and whether the
> > original Acked-by/Reviewed-by can be retained.
> > 
> > Note that I might have lost some portions of code
> > during conflict resolution. It seems to me I haven't
> > but you know.
> > 
> > The branch:
> > 
> > 
https://gitlab.collabora.com/andrzej.p/kernel-tests/-/tree/thermal-dont-poll-disabled-for-daniel
> 
> Ok, I propose to keep the these three patches on top of V7.
> 
> Rui are you fine with that ?

Yes, that works for me.

thanks,
rui
> 
> 
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux