Re: [PATCH v3 1/4] media: dt-bindings: media: i2c: Switch to assigned-clock-rates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thank you for the patch.

On Fri, Mar 13, 2020 at 09:12:31PM +0000, Lad Prabhakar wrote:
> Use assigned-clock-rates to specify the clock rate. Also mark
> clock-frequency property as deprecated.

I would phrase it the other way around, this patch mainly deprecates
clock-frequency, and as a side effect recommends usage of
assigned-clock-rates.

"Deprecate usage of the clock-frequency propertly. The preferred method
to set clock rates is to use assigned-clock-rates."

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/media/i2c/ov5645.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> index 72ad992..e62fe82 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> @@ -8,7 +8,7 @@ Required Properties:
>  - compatible: Value should be "ovti,ov5645".
>  - clocks: Reference to the xclk clock.
>  - clock-names: Should be "xclk".
> -- clock-frequency: Frequency of the xclk clock.
> +- clock-frequency (deprecated): Frequency of the xclk clock.

I would drop this completely. Drivers need to ensure backward
compatibility, but DT bindings should only document the latest version,
the history is available in git.

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

While at it, can I enlist you to convert these bindings to yaml ? :-)

>  - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
>    to the hardware pin PWDNB which is physically active low.
>  - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> @@ -37,7 +37,8 @@ Example:
>  
>  			clocks = <&clks 200>;
>  			clock-names = "xclk";
> -			clock-frequency = <24000000>;
> +			assigned-clocks = <&clks 200>;
> +			assigned-clock-rates = <24000000>;
>  
>  			vdddo-supply = <&camera_dovdd_1v8>;
>  			vdda-supply = <&camera_avdd_2v8>;

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux