[PATCH v3 0/4] ov5645: Switch to assigned-clock-rates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

This patch series adds support for using assigned-clock-rates for
specifying clock rates for ov5645 driver

Thanks,
Prabhakar

Changed for v3:
* Dropped reading assigned-clock-rates
* Increased the maximum clock frequency to 24480000

Changes for v2:
* Instead of completely dropping clock-frequency property marked it as
  deprecated.
* Split up imx6qdl-wandboard.dtsi changes as separate patch.

Lad Prabhakar (4):
  media: dt-bindings: media: i2c: Switch to assigned-clock-rates
  media: i2c: ov5645: Switch to assigned-clock-rates
  media: i2c: ov5645: Set maximum leverage of external clock frequency
    to 24480000
  ARM: dts: imx6qdl-wandboard: Switch to assigned-clock-rates for ov5645
    node

 .../devicetree/bindings/media/i2c/ov5645.txt       |  5 ++--
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |  3 ++-
 drivers/media/i2c/ov5645.c                         | 27 ++++++++++++----------
 3 files changed, 20 insertions(+), 15 deletions(-)

-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux