This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate when
assigned-clock-rates is passed.
The driver now sets the clock frequency only if the deprecated property
clock-frequency is defined instead assigned-clock-rates, this is to avoid
breakage with existing DT binaries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/media/i2c/ov5645.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d1..4fbabf3 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1055,6 +1055,7 @@ static int ov5645_probe(struct i2c_client *client)
struct device_node *endpoint;
struct ov5645 *ov5645;
u8 chip_id_high, chip_id_low;
+ bool set_clk = false;
unsigned int i;
u32 xclk_freq;
int ret;
@@ -1094,12 +1095,18 @@ static int ov5645_probe(struct i2c_client *client)
return PTR_ERR(ov5645->xclk);
}
- ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
- if (ret) {
- dev_err(dev, "could not get xclk frequency\n");
- return ret;
+ /* check if deprecated property clock-frequency is defined */
+ ret = of_property_read_u32(dev->of_node, "clock-frequency",
+ &xclk_freq);
+ if (!ret) {
+ ret = clk_set_rate(ov5645->xclk, xclk_freq);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
}
+ xclk_freq = clk_get_rate(ov5645->xclk);
/* external clock must be 24MHz, allow 1% tolerance */
if (xclk_freq < 23760000 || xclk_freq > 24240000) {
dev_err(dev, "external clock frequency %u is not supported\n",
@@ -1107,12 +1114,6 @@ static int ov5645_probe(struct i2c_client *client)
return -EINVAL;
}
- ret = clk_set_rate(ov5645->xclk, xclk_freq);
- if (ret) {
- dev_err(dev, "could not set xclk frequency\n");
- return ret;
- }
-
for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
ov5645->supplies[i].supply = ov5645_supply_name[i];
--
2.7.4
