Hi Jacopo, On 15/10/2019 11:46, Jacopo Mondi wrote: > Add a driver for the R-Car Display Unit Color Correction Module. > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit > to perform image enhancement and color correction. > > Add support for CMM through a driver that supports configuration of > the 1-dimensional LUT table. More advanced CMM features will be > implemented on top of this initial one. > This is looking good to me. I have patches which start to add CLU on top of this, which refactor things slightly - but I don't think that refactoring needs to be in this series, and this version is independent and looks good ... thus: Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > --- > drivers/gpu/drm/rcar-du/Kconfig | 7 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++ > drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++ > 4 files changed, 266 insertions(+) > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > index 1529849e217e..539d232790d1 100644 > --- a/drivers/gpu/drm/rcar-du/Kconfig > +++ b/drivers/gpu/drm/rcar-du/Kconfig > @@ -13,6 +13,13 @@ config DRM_RCAR_DU > Choose this option if you have an R-Car chipset. > If M is selected the module will be called rcar-du-drm. > > +config DRM_RCAR_CMM > + bool "R-Car DU Color Management Module (CMM) Support" > + depends on DRM && OF > + depends on DRM_RCAR_DU DRM_RCAR_DU already depends on both DRM && OF, so I wonder if those are needed to be specified explicitly. Doesn't hurt of course, but I see DRM_RCAR_DW_HDMI does the same, and so does DRM_RCAR_LVDS, so I don't think you need to remove it. > + help > + Enable support for R-Car Color Management Module (CMM). > + > config DRM_RCAR_DW_HDMI > tristate "R-Car DU Gen3 HDMI Encoder Support" > depends on DRM && OF > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > index 6c2ed9c46467..4d1187ccc3e5 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c > new file mode 100644 > index 000000000000..9675a8587dee > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c > @@ -0,0 +1,198 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * rcar_cmm.c -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > + */ > + > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > + > +#include <drm/drm_color_mgmt.h> > + > +#include "rcar_cmm.h" > + > +#define CM2_LUT_CTRL 0x0000 > +#define CM2_LUT_CTRL_LUT_EN BIT(0) > +#define CM2_LUT_TBL_BASE 0x0600 > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4) > + > +struct rcar_cmm { > + void __iomem *base; > + > + /* > + * @lut: 1D-LUT status > + * @lut.enabled: 1D-LUT enabled flag > + */ > + struct { > + bool enabled; > + } lut; This used to be a more complex structure in an earlier version storing a cached version of the table. Now that the cached entry is removed, does this need to be such a complex structure rather than just say, a bool lut_enabled? (We will soon add an equivalent clu_enabled too, but I don't know what other per-table options we'll need.) In fact, we'll potentially have other options specific to the HGO, and CSC at some point in the future - so grouping by entity is indeed a good thing IMO. > +}; > + > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) > +{ > + return ioread32(rcmm->base + reg); > +} > + > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) > +{ > + iowrite32(data, rcmm->base + reg); > +} > + > +/* > + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision > + * and write to the CMM registers. > + * @rcmm: Pointer to the CMM device > + * @drm_lut: Pointer to the DRM LUT table > + */ > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, > + const struct drm_color_lut *drm_lut) > +{ > + unsigned int i; > + > + for (i = 0; i < CM2_LUT_SIZE; ++i) { > + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 > + | drm_color_lut_extract(drm_lut[i].green, 8) << 8 > + | drm_color_lut_extract(drm_lut[i].blue, 8); > + > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry); > + } > +} > + > +/* > + * rcar_cmm_setup() - Configure the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * @config: The CMM unit configuration > + * > + * Configure the CMM unit with the given configuration. Currently enabling, > + * disabling and programming of the 1-D LUT unit is supported. > + */ > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + /* Disable LUT if requested. */ > + if (!config->lut.enable) { > + if (rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + } > + > + return 0; > + } > + > + /* Enable LUT and program the new gamma table values. */ > + if (!rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN); > + rcmm->lut.enabled = true; > + } > + > + rcar_cmm_lut_write(rcmm, config->lut.table); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_setup); > + > +/* > + * rcar_cmm_enable() - Enable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Enable the CMM unit by enabling the parent clock. > + */ > +int rcar_cmm_enable(struct platform_device *pdev) > +{ > + int ret; > + > + ret = pm_runtime_get_sync(&pdev->dev); > + if (ret < 0) > + return ret; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_enable); > + > +/* > + * rcar_cmm_disable() - Disable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Disable the CMM unit by stopping the parent clock. > + */ > +void rcar_cmm_disable(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + > + pm_runtime_put(&pdev->dev); > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_disable); > + > +/* > + * rcar_cmm_init() - Initialize the CMM > + * @pdev: The platform device associated with the CMM instance > + * > + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet, > + * -ENODEV if the DRM_RCAR_CMM config option is disabled > + */ > +int rcar_cmm_init(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + if (!rcmm) > + return -EPROBE_DEFER; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_init); > + > +static int rcar_cmm_probe(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm; > + > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); > + if (!rcmm) > + return -ENOMEM; > + platform_set_drvdata(pdev, rcmm); > + > + rcmm->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(rcmm->base)) > + return PTR_ERR(rcmm->base); > + > + pm_runtime_enable(&pdev->dev); > + > + return 0; > +} > + > +static int rcar_cmm_remove(struct platform_device *pdev) > +{ > + pm_runtime_disable(&pdev->dev); > + > + return 0; > +} > + > +static const struct of_device_id rcar_cmm_of_table[] = { > + { .compatible = "renesas,rcar-gen3-cmm", }, > + { .compatible = "renesas,rcar-gen2-cmm", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); > + > +static struct platform_driver rcar_cmm_platform_driver = { > + .probe = rcar_cmm_probe, > + .remove = rcar_cmm_remove, > + .driver = { > + .name = "rcar-cmm", > + .of_match_table = rcar_cmm_of_table, > + }, > +}; > + > +module_platform_driver(rcar_cmm_platform_driver); > + > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h > new file mode 100644 > index 000000000000..358ec03cf48a > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h > @@ -0,0 +1,60 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * rcar_cmm.h -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > + */ > + > +#ifndef __RCAR_CMM_H__ > +#define __RCAR_CMM_H__ > + > +#define CM2_LUT_SIZE 256 > + > +struct drm_color_lut; > +struct platform_device; > + > +/** > + * struct rcar_cmm_config - CMM configuration > + * > + * @lut: 1D-LUT configuration > + * @lut.enable: 1D-LUT enable flag > + * @lut.table: 1D-LUT table entries > + */ > +struct rcar_cmm_config { > + struct { > + bool enable; > + struct drm_color_lut *table; > + } lut; > +}; > + > +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM) > +int rcar_cmm_init(struct platform_device *pdev); > + > +int rcar_cmm_enable(struct platform_device *pdev); > +void rcar_cmm_disable(struct platform_device *pdev); > + > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config); > +#else > +static inline int rcar_cmm_init(struct platform_device *pdev) > +{ > + return -ENODEV; Excellent :-D > +} > + > +static inline int rcar_cmm_enable(struct platform_device *pdev) > +{ > + return 0; > +} > + > +static inline void rcar_cmm_disable(struct platform_device *pdev) > +{ > +} > + > +static inline int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + return 0; > +} > +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */ > + > +#endif /* __RCAR_CMM_H__ */ >