Hi Kaneko-san,
On Tue, Jul 23, 2019 at 8:03 PM Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx> wrote:
> Sort nodes.
>
> If node address is present
> * Sort by node address, grouping all nodes with the same compat string
> and sorting the group alphabetically.
> Else
> * Sort alphabetically
>
> This should not have any run-time effect.
>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
You forgot to sort the i2c slave nodes.
As this kind of patches is hard to rebase and rework, I'm fixing that up while
applying:
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -83,6 +83,56 @@
};
&i2c2 {
+ i2cswitch2: i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+ /* Audio_SDA, Audio_SCL */
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ pcm3168a: audio-codec@44 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,pcm3168a";
+ reg = <0x44>;
+ clocks = <&clksndsel>;
+ clock-names = "scki";
+
+ VDD1-supply = <&snd_3p3v>;
+ VDD2-supply = <&snd_3p3v>;
+ VCCAD1-supply = <&snd_vcc5v>;
+ VCCAD2-supply = <&snd_vcc5v>;
+ VCCDA1-supply = <&snd_vcc5v>;
+ VCCDA2-supply = <&snd_vcc5v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mclk-fs = <512>;
+ port@0 {
+ reg = <0>;
+ pcm3168a_endpoint_p: endpoint {
+
remote-endpoint = <&rsnd_for_pcm3168a_play>;
+ clocks = <&clksndsel>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ pcm3168a_endpoint_c: endpoint {
+
remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+ clocks = <&clksndsel>;
+ };
+ };
+ };
+ };
+ };
+ };
+
/* U11 */
gpio_exp_74: gpio@74 {
compatible = "ti,tca9539";
@@ -153,56 +203,6 @@
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
-
- i2cswitch2: i2c-switch@71 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x71>;
- reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-
- /* Audio_SDA, Audio_SCL */
- i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
-
- pcm3168a: audio-codec@44 {
- #sound-dai-cells = <0>;
- compatible = "ti,pcm3168a";
- reg = <0x44>;
- clocks = <&clksndsel>;
- clock-names = "scki";
-
- VDD1-supply = <&snd_3p3v>;
- VDD2-supply = <&snd_3p3v>;
- VCCAD1-supply = <&snd_vcc5v>;
- VCCAD2-supply = <&snd_vcc5v>;
- VCCDA1-supply = <&snd_vcc5v>;
- VCCDA2-supply = <&snd_vcc5v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- mclk-fs = <512>;
- port@0 {
- reg = <0>;
- pcm3168a_endpoint_p: endpoint {
-
remote-endpoint = <&rsnd_for_pcm3168a_play>;
- clocks = <&clksndsel>;
- };
- };
- port@1 {
- reg = <1>;
- pcm3168a_endpoint_c: endpoint {
-
remote-endpoint = <&rsnd_for_pcm3168a_capture>;
- clocks = <&clksndsel>;
- };
- };
- };
- };
- };
- };
};
&i2c4 {
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v5.4.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
