Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
---
This patch is based on the devel branch of Simon Horman's renesas tree.
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 118 +++++++++++++++----------------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 27851a7..5ac22a8 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -100,13 +100,6 @@
line-name = "Audio_Out_OFF";
};
- sd-wifi-mux {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_HIGH>;
- output-low; /* Connect WL1837 */
- line-name = "SD WiFi mux";
- };
-
hub_pwen {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -121,6 +114,13 @@
line-name = "HUB rst";
};
+ otg_extlpn {
+ gpio-hog;
+ gpios = <9 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "OTG EXTLPn";
+ };
+
otg_offvbusn {
gpio-hog;
gpios = <8 GPIO_ACTIVE_HIGH>;
@@ -128,11 +128,11 @@
line-name = "OTG OFFVBUSn";
};
- otg_extlpn {
+ sd-wifi-mux {
gpio-hog;
- gpios = <9 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "OTG EXTLPn";
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-low; /* Connect WL1837 */
+ line-name = "SD WiFi mux";
};
snd_rst {
@@ -279,14 +279,50 @@
power-source = <3300>;
};
+ sound_pcm_pins: sound-pcm {
+ groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
+};
- sound_pcm_pins: sound-pcm {
- groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
- function = "ssi";
+&rcar_sound {
+ pinctrl-0 = <&sound_pins
+ &sound_clk_pins
+ &sound_pcm_pins>;
+
+ ports {
+ /* rsnd_port0/1 are on salvator-common */
+ rsnd_port2: port@2 {
+ reg = <2>;
+ rsnd_for_pcm3168a_play: endpoint {
+ remote-endpoint = <&pcm3168a_endpoint_p>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_for_pcm3168a_play>;
+ frame-master = <&rsnd_for_pcm3168a_play>;
+ dai-tdm-slot-num = <8>;
+
+ playback = <&ssi3>;
+ };
+ };
+ rsnd_port3: port@3 {
+ reg = <3>;
+ rsnd_for_pcm3168a_capture: endpoint {
+ remote-endpoint = <&pcm3168a_endpoint_c>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_for_pcm3168a_capture>;
+ frame-master = <&rsnd_for_pcm3168a_capture>;
+ dai-tdm-slot-num = <6>;
+
+ capture = <&ssi4>;
+ };
+ };
};
};
@@ -322,17 +358,6 @@
};
};
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&xhci0 {
- status = "okay";
-};
-
&sound_card {
dais = <&rsnd_port0 /* ak4613 */
&rsnd_port1 /* HDMI0 */
@@ -341,42 +366,17 @@
>;
};
-&rcar_sound {
- pinctrl-0 = <&sound_pins
- &sound_clk_pins
- &sound_pcm_pins>;
-
- ports {
- /* rsnd_port0/1 are on salvator-common */
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_for_pcm3168a_play: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_p>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_for_pcm3168a_play>;
- frame-master = <&rsnd_for_pcm3168a_play>;
- dai-tdm-slot-num = <8>;
-
- playback = <&ssi3>;
- };
- };
- rsnd_port3: port@3 {
- reg = <3>;
- rsnd_for_pcm3168a_capture: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_c>;
+&ssi4 {
+ shared-pin;
+};
- dai-format = "i2s";
- bitclock-master = <&rsnd_for_pcm3168a_capture>;
- frame-master = <&rsnd_for_pcm3168a_capture>;
- dai-tdm-slot-num = <6>;
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
- capture = <&ssi4>;
- };
- };
- };
+ status = "okay";
};
-&ssi4 {
- shared-pin;
+&xhci0 {
+ status = "okay";
};
--
1.9.1
