From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7790-lager.dts | 7 +++++++
arch/arm/boot/dts/r8a7790-stout.dts | 7 ++++++-
arch/arm/boot/dts/r8a7791-koelsch.dts | 7 +++++++
arch/arm/boot/dts/r8a7791-porter.dts | 7 +++++++
arch/arm/boot/dts/r8a7792-blanche.dts | 7 +++++++
arch/arm/boot/dts/r8a7793-gose.dts | 7 +++++++
6 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e83d46..d637b9727808 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -423,6 +423,8 @@
*/
i2cpwr: i2c-13 {
compatible = "i2c-demux-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
i2c-parent = <&iic3>, <&i2c3>;
i2c-bus-name = "i2c-pwr";
#address-cells = <1>;
@@ -615,6 +617,11 @@
function = "iic3";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
hsusb_pins: hsusb {
groups = "usb0_ovc_vbus";
function = "usb0";
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 7a7d3b84d1a6..ad68e6034b43 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -179,6 +179,11 @@
function = "iic3";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -317,7 +322,7 @@
&iic3 {
pinctrl-names = "default";
- pinctrl-0 = <&iic3_pins>;
+ pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
status = "okay";
pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e6580aa0cea3..a116bfc11f0b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -540,6 +540,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -776,6 +781,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fefdf8238bbe..e08d257f5d0c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -228,6 +228,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -373,6 +378,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index b6fa80c3b07e..b7af14de7c8e 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -234,6 +234,11 @@
groups = "du1_rgb666", "du1_sync", "du1_disp";
function = "du1";
};
+
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
};
&rwdt {
@@ -314,6 +319,8 @@
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f51601af89a2..9984ebf06695 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -514,6 +514,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -711,6 +716,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
--
2.11.0
